3M Scotchcast TNM XR9101 Epoxy liquid resin TWIST-N-MIX, black, 50 g

Variants

Reset selection

€27.22* % €0.00* (0.00% saved)

Unit price: €27.22* % €0.00*

Unit price (net): €22.87 % €0.00

Contents: 0.05 kilogram (€544.40* / 1 kilogram)

Delivery time 9-15 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

Note Delivery cannot be made to private individuals. Delivery may only be made to resellers, professional users or public research, testing or teaching institutions if we have complied with the attached Chemicals Prohibition Ordinance completely filled out and signed by you.

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Scotchcast TNM XR9101 Epoxy liquid resin TWIST-N-MIX, black, 50 g"

The black epoxy liquid resin with 2-component mixing system, low viscosity, is characterised by good thermal and mechanical resistance and good adhesion.

Properties

https://multimedia.3m.com/mws/media/1064391O/3mtm-scotchcasttm-electrical-resin-parts-a-and-b.tif

Questions about the article?

Signal word

Attention

Hazard pictogram(s)

Ausrufezeichen

Umwelt

Hazard statement / CLP

H319 Causes serious eye irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.

Prevention

P280E Wear protective gloves.
P273 Avoid release to the environment.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 76736

Part number: TNM-XR9101B

SAP number: 7100200788

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

Recently viewed products

SIGA Unwinder

The SIGA dispenser is made of special adhesive-repellent plastic with a tear-resistant belt and built-in stainless steel blade. It is ideal for the products Rissan 60, Sicrall 60, Twinet, Corvum, Wigluv 60, Wigluv black and Farmer. You can work faster and more safely with the dispenser.

€26.08*

3M PELTOR CH-5 communication headset, headband J11 connector, high-viz

3M Peltor CH-5 communication headset is the headset with the highest attenuation value on the market. The 3M Peltor CH-5 communication headset offers an attenuation value (SNR) of 37 dB and provides very good protection against impulse noise. The 3M Peltor CH-5 communication headset features a newly developed waterproof boom microphone with improved external noise cancellation and is also compatible with standard 3M Peltor adapters. The intelligent design makes maintenance and care quick and easy, even in the field. Area of application: Industry and military with very high noise ranges

€583.60*

3M Roloc fiber disc 787C, 50.8 mm, 80

The 3M Roloc fibre disc 787C is ideal for the daily use of fibre discs without compromising on performance and economy. Achieve excellent service life and removal results for stainless steel up to grit size 120+, especially at low and medium pressure. The special design of this fibre disc ensures low temperature development on stainless steels, which are known for their poor thermal conductivity. The 3M Roloc quick-change system allows the abrasive discs to be changed quickly and easily without additional tools. The discs can be detached from the backing pad or mandrel and secured with a simple twist. For a wide variety of applications, this system provides a wide range of sanding tools and corresponding holders in different designs and degrees of hardness. The quick changeover reduces downtimes and offers a major advantage, especially for multi-stage work processes. Grit sizes are colour-coded for easier handling. The combination of this system with 3M Roloc angle grinders guarantees reliable processes and the best results

€1.39*

Tyrolit Serrated lock washer DxH 125x22.23 CERAMIC for stainless steel, P60, shape: 28N - straight version (plastic carrier body), Art. 719847

Thanks to the self-sharpening ceramic abrasive grain, the PREMIUM CERAMIC flap disc is particularly suitable for stainless steels and demanding grinding applications. With an additional TOP SIZE coating, this product offers cool grinding, which enables a longer tool life and reduces discolouration of the workpiece surface. Self-sharpening of the abrasive grain over the entire service life of the disc results in a more uniform surface finish.

€3.50*

3M Scotch packaging tape 375 E, transparent, 75 mm x 66 m, 0.075 mm

Scotch Adhesive Tape 375E is a high performance packaging tape with an extremely strong backing of rigid, bi-axially stretched polypropylene film and a synthetic rubber adhesive

Contents: 66 meter (€0.09* / 1 meter)

Variants from €3.96*

€5.94*

Tyrolit Pot shank brushes DxLxH-GExI 40x10x15-6x30 For stainless steel, shape: 52TDW - (pot shank brushes), Art. 890758

Cup shaft brushes are suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Crimped cup brushes are suitable for cleaning work such as removing paint, rust, scale, encrustations or for deburring.

€11.11*