3M soft PVC adhesive tape 471 F, green, 6 mm x 33 m, 0.13 mm

The 3M adhesive marking tape 471F is a soft PVC adhesive tape for various applications. It is suitable for covering and sealing all surfaces and containers, including round and irregularly shaped ones, for interior decoration, as hazard marking, for labelling playing fields and areas and for general marking and protection. The film is very conformable, abrasion-resistant and resistant to many solvents except ketones, chlorinated hydrocarbons and esters.

The 3M gas and combination filter 6095 has protection level A2P3R and offers protection against organic gases and vapours (boiling point above 65°C) and particles. The filter fits onto the 6000, 7000 and 7500 mask series from 3M using a bayonet click connection.

The 3M adhesive marking tape 471F is a soft PVC adhesive tape for various applications. It is suitable for covering and sealing all surfaces and containers, including round and irregularly shaped ones, for interior decoration, as hazard marking, for labelling playing fields and areas and for general marking and protection. The film is very conformable, abrasion-resistant and resistant to many solvents except ketones, chlorinated hydrocarbons and esters.

The 3M Secure Click particle filter D3138, P3 R with activated carbon, is a lightweight filter that combines protection and comfort. Used in pairs, our filters offer low breathing resistance and a good balance with an optimal field of vision. They can be quickly and easily clicked into place on the 3M Secure Click HF-800(SD) half mask series. The additional activated carbon reduces exposure to organic and acid gases & vapours below the limit value and offers protection against ozone + HF up to 10 times the limit value (HF up to max. 30 ppm, whichever is reached first).

The 3M Hookit Purple Premium 737U / Multihole is a specially developed abrasive for the increased requirements in the car repair sector. It has the improved dust-repellent Fre-Cut non-stick coating and its innovative spiral-shaped multihole perforation supports the suction system of the 3M Hookit Direct Flow II Universal Multihole backing pad. Both prevent premature clogging of the grain surface. As a result, the abrasive disc is characterised by  a noticeably longer service life with consistent continuous cutting performance. Its hook-and-loop backing made of 3M Hookit Brushed Nylon also enables quick and easy replacement without hole alignment, which saves a considerable amount of time. When sanding beads and edges, we also recommend using the  3M Hookit Universal Interface Pad.

This fibre disc was specially developed for quality-conscious end users with low consumption. It offers a fast way to remove material and work comfortably with low vibration. Based on a mixture of aluminium oxide, it can be used universally. Our range includes fibre discs in grit sizes 24 to 120.

Multicutter-Sägeblatt, das besonders für Holz geeignet ist. Ultrascharf mit Doppelverzahnung, infektionsfreie Oberfläche und wiederverschließbare Verpackung – das ultimative Sägeblatt für Holz.   Die Sägeblätter sind kompatibel mit Fein Multimaster, Makita, Bosch, Milwaukee, AEG, Ridgid, Skil, Dremel, Einhell, Mastercraft, Craftsman und andere.   Die Sägeblätter des Multicutters lassen sich leicht auswechseln und erleichtern die Arbeit an verschiedenen Projekten und Materialien, ohne dass das Werkzeug gewechselt werden muss. Sie sind eine gute Investition für professionelle Handwerker und Heimwerker, die häufig an verschiedenen Projekten arbeiten und Materialien mit großer Präzision und Kontrolle schneiden möchten.

This polyurethane film offers optimum protection against abrasion, wear and erosion caused by mechanical stress and, when applied to painted surfaces, shows little or no discolouration even after prolonged exposure to environmental influences. 8672 is equipped with a durable, solvent-resistant, pressure-sensitive acrylic adhesive, which is protected by an easy-to-remove liner.

3M HVLP high performance nozzle heads for pressure cups provide excellent spray performance for coatings such as paints, primers, base coats, top coats, clear coats and adhesives. Replaceable nozzles have been specially developed for pressurised applications. These are used with the 3M high performance spray gun, which ensures a spray performance comparable to a completely new device every time the nozzle is changed.   What makes the 3M high performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance with every application, every day. 3M HVLP High Performance Nozzle Head Replacement Kits for Pressure Cups are available with 0.9, 1.1, 1.4, 1.8 and 2.0 size nozzle heads for a wide range of industrial and automotive coatings. They are suitable for high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M high-performance spray gun system. They are attached to the paint hose provided for this purpose and ensure continuous spray application from a pressurised container or tank. The nozzle heads are attached to the pressure hose of the 3M high performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for changing. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

e.g. cleaning of corrosion and surface dirt, matting of metal surfaces, smoothing of wooden surfaces, removal of wood fibres before and after priming.