3M Spacer film 7995MP, transparent, 305 mm x 457 mm, 0.125 mm

The 3M Xtract pneumatic random orbital sander is a key component of the 3M Xtract sanding system. Together with 3M Xtract mesh discs and the portable 3M Xtract dust extraction unit, this powerful 0.28 HP (209 W) sander enables virtually dust-free sanding.   Robust construction for industrial use. 3M Xtract pneumatic random orbital sanders are equipped with powerful, precision-balanced air motors and durable, lightweight aluminium housings. These high-quality components withstand the long processing times in the workshop. Leave the dust behind. If you want a clean working environment and more efficient sanding, the 3M Xtract pneumatic random orbital sander is for you. Designed for dust extraction as part of the 3M Xtract sanding solution, these sanders connect easily to our 3M Xtract portable dust extraction unit, 3M machine sanding filter bags or your existing centralised dust extraction system. The rear threaded attachment allows for easy and safe attachment and removal of a 1" male threaded hose (sold separately) to effectively remove dust from the workpiece and surrounding area. In combination with 3M Xtract Net Discs and a dust extraction system, the system extracts up to 97 % of the dust generated during sanding. Experience the benefits of 3M Xtract random orbital sanding solutions. 3M is your system provider for all sanding needs. From mesh discs to random orbital sanders to portable dust collection units, we have everything you need to increase productivity and part quality in your shop. 3M's technical experts have decades of application and industry knowledge to ensure you get the right abrasive and the optimal system solution. Applications in focus Metal working and processing Sanding of filler Sanding of gelcoat Sanding of composite materials Woodworking Sanding stroke of 2.5 mm Chrome-plated lever Fine sanding When should you choose a sanding stroke of 2.5 mm? - For the use of fine grits - For the lowest material removal   Sanding stroke of 5 mm Silver lever General sanding work When should you choose a sanding stroke of 5 mm? - The most commonly used sanding stroke - Good ratio of material removal and finish   Sanding stroke of 8 mm Black lever Aggressive sanding When should you choose a sanding stroke of 8 mm? - When more material removal is required than with a sanding stroke of 5 mm - If the sanding should not be as aggressive as with a sanding stroke of 10 mm   Sanding stroke of 10 mm Golden lever Maximum aggressive sanding When should you choose a sanding stroke of 10 mm? - For maximum aggressive material removal - For sanding large surfaces or when a high removal rate is required

3M 5451 and 5453 are PTFE-coated glass fibre adhesive tapes with a resilient silicone adhesive. These adhesive tapes have very good sliding properties, a very good non-stick effect and a high thermal and mechanical load capacity. Adhesive tape for coating plastic film welding equipment and as a sliding coating with high mechanical strength and an adhesive-repellent surface.

The 3M medium voltage termination Quick Term II of the 94-EB series fulfils the requirements of DIN VDE 0278 Part 628 and Part 629.1 for indoor and outdoor applications and is suitable for all VDE and TGL plastic-insulated 12/20-kilovolt and 18/30-kilovolt cables with one or three conductors. The one-piece cold shrink termination with integrated refractive field control ensures permanent radial contact pressure. It is tracking-resistant and made of weather-resistant HTV silicone rubber. It therefore provides moisture-resistant insulation and is particularly suitable for use in non-air-conditioned rooms and outdoors. The quick and easy installation by pulling out the support spiral enables reliable installation of the narrow end cap even without special tools, such as a shrink torch. The scope of delivery includes all components required for installation, but no cable lugs.

Post-it Meeting Charts are perfect for brainstorming, problem solving and presentations. The non-translucent sheets are easy to tear off, adhere to almost all wall surfaces and can be removed without leaving any residue.

The dust-repellent coating makes it particularly suitable for filler and lacquer sanding or intermediate lacquer sanding of nitro lacquers, DD and SH lacquers.

The BASIC 2in1 flap disc offers good specific stock removal. Thanks to a new upgrade, the BASIC flap disc also achieves an unprecedented service life and an increase in performance of 30%. TYROLIT 2in1 flap discs are used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels.