3M Speedglas 9100MP face seal #534200

Round shank brushes are suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Wavy brushes are suitable for derusting, cleaning, smoothing, polishing, matting and roughening. Knotted round shank brushes are designed for weld seam processing and for removing scale and paint.

If the system is equipped with a new standard battery (TR-630) and a new particle filter (TR-6710E), it has a runtime of 6-12 hours at standard airflow setting. The system run time depends on battery age, filter loading, filter selection and the airflow setting selected by the user. The TR-630 battery is fully charged in under 4 hours. For more information on the system duration, please refer to the instruction manual.

The yellow 3M EMS iD ball marker - Gas makes the marking and subsequent location of underground gas pipes extremely easy. It can be located to a maximum depth of 1.20 metres, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for all types of soil. The free-floating design in a watertight PE sphere ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the sphere is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal ducts or pipes, fences or high-voltage power lines. The EMS iD markers are supplied with an individual, pre-programmed serial number. This serial number is also attached to the marker in the form of a removable, self-adhesive sticker with a barcode and can be stuck directly onto the cable/location plan. If the ball marker receives the "Read"-Signal from a 3M Dynatel cable locator, it transmits the information previously stored in it. The iD markers can be temporarily or permanently programmed to store user-defined information such as cable or joint data, type of application or other important details. Once this data has been read by the locator, it can be transferred to a PC via a serial RS232 connection. These active iD ball markers are also compatible with older, passive markers.

SIGA Nail Sealing Tape II is ideal for permanently rainproof sealing when installing battens on under-roof membranes, especially in conjunction with SIGA-Majcoat under-roof membrane. In this way, a permanently windproof building envelope can be created even with nail or screw penetrations. The resistance to driving rain in combination with Majcoat and Wigluv 60 has been verified by the Technical University of Berlin.

The 3M fibre disc 782C, developed for fast stock removal on mild steel, is characterised by exceptional cutting properties, durability and easy handling. The performance of these discs represents a major advance over conventional fibre discs. Thanks to the advanced abrasive technology, this fibre disc is an excellent choice for demanding applications such as weld removal, blending and surface finishing.

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.