3M Stikit backing pad, yellow, unperforated, 150 mm #05576

Double-sided foam adhesive tape. Foam properties: very low thickness tolerances, constant recovery properties of the foam. Adhesive properties: low contact adhesion to the plate side, good repositionability of the printing plate, very good hold for mounted printing plates, good removability of the plate, very good hold of the adhesive tape on the sleeve surface

The transparent line allows you to apply elastic bumpers invisibly to glass, Plexiglas or coloured surfaces (wood, plastic, metal) without affecting the colour fastness or yellowing. Standard shapes: round, square, rectangular.

Scotch-Brite non-woven tapes from 3M are ideal for finishing and deburring work. Various backings, different degrees of fineness and many different dimensions allow them to be used on almost any machine for a wide range of applications.

Caution: sharp edges! The yellow and black partially reflective 3M industrial warning marking 13058 identifies fixed obstacles such as boundary and gate posts, kerb edges, floor hatches, weather doors, entrances to high-bay warehouses, ramps, bottlenecks or uneven floors that can be tripped over. This helps to prevent accidents and raises employees' safety awareness at the same time. The warning markings are self-adhesive and comply with the requirements of DIN 4844. The delivery includes one roll left pointing & right pointing Colour: yellow/black. Roll dimensions: 50 mm x 25 m.

The range of pressed compact discs extends from an aggressive and rigid deburring tool to a soft tool for a perfect surface finish. They are particularly suitable for hard-to-reach areas and do not change the surface geometry of the workpiece in any way when used. The main areas of application are deburring, cleaning, blending, finishing and the processing of weld seams. Compact discs offer increased safety compared to other deburring tools and a particularly cool finish.

3M HVLP high performance nozzle heads for pressure cups provide excellent spray performance for coatings such as paints, primers, base coats, top coats, clear coats and adhesives. Replaceable nozzles have been specially developed for pressurised applications. These are used with the 3M high performance spray gun, which ensures a spray performance comparable to a completely new device every time the nozzle is changed.   What makes the 3M high performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance with every application, every day. 3M HVLP High Performance Nozzle Head Replacement Kits for Pressure Cups are available with 0.9, 1.1, 1.4, 1.8 and 2.0 size nozzle heads for a wide range of industrial and automotive coatings. They are suitable for high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M high-performance spray gun system. They are attached to the paint hose provided for this purpose and ensure continuous spray application from a pressurised container or tank. The nozzle heads are attached to the pressure hose of the 3M high performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for changing. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.