3M Structural adhesive, 07333 Impact-resistant structural adhesive, double cartridge, 200 ml, incl. 2 nozzles and 1 brush, purple/silver

€101.85* % €0.00* (0.00% saved)
Unit price: €101.85* % €0.00*
Unit price (net): €85.59 % €0.00
Contents: 0.2 liter (€509.25* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days


So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.
Product information "3M Structural adhesive, 07333 Impact-resistant structural adhesive, double cartridge, 200 ml, incl. 2 nozzles and 1 brush, purple/silver"

3M Structural Adhesive (IRSA) has been developed to - to withstand higher loads than conventional adhesives and is ideal for OEM-specified automotive structural applications. It adheres to properly prepared steel, aluminium and carbon fibre surfaces, which is of paramount importance as OEMs strive for high strength in increasingly lightweight structures. This two-component epoxy adhesive is recommended for all welded and riveted joints when specified by an OEM. It offers an extended open time - up to one hour - and cures quickly when exposed to heat (30 minutes at 80 °C). When applied, this adhesive is silver in colour, changing to purple as it begins to cure, indicating the start of the curing process. 3M Structural Adhesive is designed to absorb collision energies and provides increased torsional stiffness for OEM specified vehicle structures. It allows spot welding in an uncured state, typically up to three hours after application. Properly applied adhesive completely seals the joints and does not show any performance degradation even at very high or very low temperatures.

Properties
  • Specially formulated for higher impact resistance than conventional adhesives.
  • Two-component epoxy adhesive for bonding steel and aluminium in automotive construction, ideal for lightweight structures
  • Can be welded or riveted immediately after application
Advantages
  • Allows a longer open time (up to one hour) to ensure precise bonding during assembly
  • Fast curing when exposed to heat (approx. 30 minutes)
  • The adhesive, which is still silver-coloured when applied, turns purple when curing, indicating the start of the process
Product benefits
  • Outstanding performance at extreme temperatures
  • Corrosion inhibiting formula
Signal word
Attention
Hazard pictogram(s)

Ausrufezeichen

Gesundheitsgefahr

Umwelt

Hazard statement / CLP

H319 Causes serious eye irritation. 
H315 Causes skin irritation. 
H317 May cause an allergic skin reaction. 
H341 Suspected of causing genetic defects. 
H411 Toxic to aquatic life with long lasting effects.

Prevention

P280E Wear protective gloves. 
P273 Avoid release to the environment.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. 
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Article no: 46254
Part number: 7333
SAP number: 7100273723
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
Enquiry form

Zubehör

3M VHB cleaning cloths 150mmx150mm
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*
S-K-S 550 Cleaner Isopropanol 99.9% 1 liter
ml: 1000 ml
The  surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to  . The product is intended for industrial / professional use only.

Variants from €19.99*
€16.99*
3M Scotch-Brite Hand pad CF-HP 7447+, red, 158 mm x 224 mm, A, very fine
Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*
S-K-S pressure roller with rubber roller diameter=30mm, roller width: 45mm
Breite in mm: 45 mm | Typ: S-K-S
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*
S-K-S 560 Lime-based industrial cleaner, clear, 500 ml
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

Customers also bought

3M Scotch-Weld EPX manual applicator, basic applicator, red, manual, for 200ml cartridges #08571
3M manual pressure gun for double cartridges. Dosing of all 3M 200 ml cartridges in a mixing ratio of 1:1 or 2:1. Extremely robust metal design. With piston for even dispensing of the product.

Contents: 0.2 liter (€582.85* / 1 liter)

€116.57*
3M Body adhesive double cartridge set, black, 200 ml, incl. 2 nozzles #08115
3M Scotch-Weld 2-component construction adhesives can be applied with the EPX system: simple - fast - clean. The EPX hand applicator enables mobile and independent bonding and is used with Scotch-Weld 7271 B / A in 200 ml cartridges.

Contents: 0.2 liter (€420.30* / 1 liter)

€84.06*