3M Temflex 165 vinyl electrical insulation tape, grey, 19 mm x 20 m, 0.15 mm

For the highest demands on surface quality, combined with high cutting performance and an exceptional finish.

With 3M Fasara glass design films, glass surfaces can be stylishly designed with ease, even retrospectively: The self-adhesive polyester films are ideal for creating privacy in glass-emphasised architecture (offices, meeting rooms) and offer a wide selection for decorative applications on glass. The application is  simple, quick and does not require any removal of the existing glass during processing.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x Airflow indicator TR-971   - 1x 3M Versaflo safety helmet M207 with flame-retardant face seal and polycarbonate visor, clear

The 3M Peltor polyester interior G2D with high-quality sweat leather and four-point suspension is compatible with all 3M Peltor safety helmets. It ensures a secure fit and hygienic use of the safety helmet.

Build the right brush for your individual needs. With the radial single segments, you get the proven Scotch-Brite Bristle technology of the Cubitron ceramic abrasive grain encapsulated in solid plastic and achieve consistent work results over the entire service life. With their curved bristles (type C), the RB-ZB single segments belong to the most flexible Scotch-Brite Bristle variant. They are ideal for cleaning and light deburring applications in hard-to-reach work areas, especially as they are also available in smaller diameters. With the MN-AC mandrel, the individual segments are combined (1 segment=approx. 1.6 mm wide).

3M Scotch-Weld DP420 is an impact-resistant 2-component epoxy-based construction adhesive. The product is characterised by good fatigue resistance. The use of DP 420 replaces mechanical connections such as screws, rivets, spot welds etc. Dosing - mixing - application in just one operation - for consistent and defined quality. High shear strength - Good peel strength - Good impact strength Hand strength after 30 minutes Bonding of metals, plastics such as ABS, PA, PC, rigid PVC etc. as well as fibre composites, ceramics, wood and glass 3M Scotch-Weld DP 420 meets the requirements of UL 94 HB