3M Thermal release adhesive film 8805, white, 6 mm x 33 m, 125 µm

This pendulum surface grinding wheel ensures universal use on high-alloy steels and HSS. This is achieved through the use of special aluminium oxides and mixtures with sintered aluminium oxides combined with special bond systems. The highest cutting performance can be achieved with sintered aluminium oxide compounds such as 454A. The next higher quality level is the resin-bonded VIB-STAR CBN wheel from TYROLIT.

Build the right brush for your individual needs. With the radial single segments, you get the proven Scotch-Brite Bristle technology of the Cubitron ceramic abrasive grain encapsulated in solid plastic and achieve consistent work results over the entire service life. With their curved bristles (type C), the RB-ZB single segments belong to the most flexible Scotch-Brite Bristle variant. They are ideal for cleaning and light deburring applications in hard-to-reach work areas, especially as they are also available in smaller diameters. With the MN-AC mandrel, the individual segments are combined (1 segment=approx. 1.6 mm wide).

The 3M Peltor safety helmet G3000 with 3M Uvicator Sensor was developed in close cooperation with industry and forestry and fulfils the highest protection requirements. The patented sensor indicates when the helmet has lost its protective effect due to excessive UV radiation and should be replaced. The G30MUO model made of UV-stabilised ABS plastic is orange and equipped with a headband with a ratchet fastening system and a sweat leather. The ratchet fastening system ensures extremely precise and easy adjustment to the wearer's head size. The extra short peak ensures optimum visibility. The interior can also be rotated by 180 degrees so that the helmet can also be worn with the peak on the back of the neck. This and the slim, round shape significantly reduce the risk of getting caught and make working in confined spaces or climbing trees noticeably easier. An optional chin strap, which is available as an accessory and can be attached to the helmet's three-point fastening system, ensures customisation to the shape of the head and a perfect fit. Unlike conventional safety helmets with ventilation, the G3000 has significantly more ventilation slots. This maximum permissible ventilation area on the top of the helmet shell ensures an exceptionally high level of wearer comfort, even during physically strenuous work in warm environments. Thanks to the special profile design, it is also easy to attach earmuffs or visors. The 3M Peltor safety helmet G3000 with 3M Uvicator can be used in forestry, industry and construction. The helmet is suitable for head widths from 53 to 62 centimetres.

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.

The premium belts have been specially developed for the mini belt sander and their special bend prevents grain breakage on the tool. A good removal rate and long service life offer consistent results with reduced working time. Our belts are easy to handle and install. TYROLIT mini belts can be used universally on steel, stainless steel and non-ferrous metals.

The 3M precision-moulded ceramic grain contributes significantly to the performance of this disc. The grain tips of the triangular discs break during the sanding process, leaving sharp cutting edges at all times. The surface of the material is therefore continuously cleanly processed. The result is fast, cool sanding and an extended service life of the abrasive. This abrasive paper is a sanding tool for coarse and fine sanding of all types of wood, stainless steel sheets and leather. The semi-open coating prevents premature clogging of the sanding tool.