Ready for immediate dispatch, delivery time approx. 1 - 3 working days
The 3M 2810 Thermally Conductive Adhesive is a two-component epoxy adhesive filled with boron nitride (BN). It has good thermal conductivity and good adhesion to many surfaces, both smooth and rough. The practical double cartridge and suitable mixing nozzles are used to mix exactly the ideal mixing ratio. The adhesive can be applied directly from the cartridge using the applicator.
- Minimal outgassing and optimum adhesion
- High adhesive strength
- Good surface wetting
- Ultra-thin adhesive line
- Gap-filling
- Low thermal impedance
- Thermal coefficient: ( 1 to 1.4 W/mK)
- Good thermal conductivity ( 1 to 1.4 W/mK)
- Low CL ion content and outgassing
- Very low adhesive thickness possible
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
P280E Wear protective gloves.
P273 Avoid release to the environment.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.
P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.
Log in