Product information "3M Transfer adhesive tape 9077, transparent, 9 mm x 100 m, 0.05 mm"
The FPCs pre-assembled with 3M 9077 can be inserted into the lead-free soldering process (peak temperature 260°C, 20 sec.). The protective cover remains largely undamaged and can be easily removed. The acrylate adhesive film 9077 has good peel strength even at high temperatures. Due to the carrier material, this adhesive tape also has excellent punchability. The low outgassing of the adhesive minimises contamination of electronic components.
Properties
Adhesive film: 0.05mm
Protective cover: 0.09mm
Total: 0,14mm
Protective cover: paper
colour adhesive film: transparent
Advantages
Short-term temperature resistance: 260°C
Continuous temperature resistance: 150°C
Field of application
especially for use in the lead-free soldering process
As we make up our own adhesive tapes (cut to size), there may be a tolerance of 1-2 mm on the first roll.
0 from 0 Reviews
Give us a rating!
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
17334
SAP number:
17334
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use
The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.
Breite in mm:
158 mm
|
Farbe:
Red
|
Körnung:
Very fine
|
Länge in m:
0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.
The functional, black table dispenser is extremely sturdy, stable and non-slip. It is particularly suitable for mailrooms and shops and wherever long rolls are required. Thanks to its interchangeable core, the Scotch desktop dispenser fits adhesive tapes up to 25 mm x 66 m and roll cores of 25 mm and 76 mm diameter. The serrated metal blade makes it easy to tear off the tape. Supplied without adhesive tape. For long rolls: Adhesive tapes up to 25 mm x 66 m and roll cores of 25 mm and 76 mm diameter fit into the Scotch table dispenser - thanks to its interchangeable core.
Cup shaft brushes are suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Crimped cup brushes are suitable for cleaning work such as removing paint, rust, scale, encrustations or for deburring.
3M Scotch-Weld 4693 is a plastic adhesive based on synthetic elastomers with high initial adhesion. The product has good resistance to moisture and ageing and is solvent and heat reactivated. Scotch-Weld 4693 is particularly suitable for bonding many plastics such as polyethylene, polypropylene, nylon 6-6, impact-resistant polystyrene, polyester, rigid PVC and ABS to metals and other materials.
When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.
The chemical purity of these tools is a prerequisite for processing stainless steel grades in order to avoid negative material influences such as corrosion, pitting or reduction in fatigue strength. This tool is suitable for cutting sheet metal, profiles, pipes, rods and solid material. The range of these cutting discs extends from 1.6 to 1.9 mm, for fast and convenient work with maximum tool life, and 2.5 to 3.0 mm for maximum service life and stability.
Die 3M Cubitron 3 Fiberscheibe 1182C verfügt über das überarbeitete 3M Präzisionsgeformte Korn, das die legendäre Abtragsleistung und Standzeit der 3M Cubitron Hochleistungsschleifmittel auf ein völlig neues Niveau hebt. Diese Produktvorteile ermöglichen eine höhere Produktivität und niedrigere Gesamtkosten im Vergleich zu anderen Fiber- und Schruppscheiben beim Schleifen von Bau und Kohlenstoffstählen. Gegenüber der 3M Cubitron II Fiberscheibe 982C, 36+ wird bis zu 60 % mehr Material abgetragen. Die Scheibe zeichnet sich durch eine lange Standzeit und einen hohen Materialabtrag über einen weiten Anpressdruckbereich aus. Sie ist auch dafür ausgelegt, Hand-Arm-Vibrationen zu reduzieren, den Durchsatz zu erhöhen und bei Schleifarbeiten mit mittlerem oder hohem Anpressdruck mehr Werkstücke pro Scheibe zu bearbeiten.
Die 3M Cubitron 3 Fiberscheibe 1182C ist ein wesentliches Element einer robusten und vielseitigen Schleiflösung, sei es in Verbindung mit 3M Winkelschleifern zur Verbesserung der Anwenderfreundlichkeit oder integriert in automatisierte Prozesse wie z. B. das Schleifen von Schweißnähten per Roboter. Die Leistungsvorteile der 3M Cubitron 3 Fiberscheibe 1182C sind auf die Verbesserung und Optimierung des automatisierten Schweißnahtschleifens ausgelegt, einschließlich in Bezug auf die Betriebszeit, den Durchsatz, die Konsistenz und die Effizienz. Diese vier Schlüsselelemente sind entscheidend, wenn Sie einen bestmöglichen Schleifprozess erreichen wollen. Und mit der 3M Cubitron 3 Fiberscheibe 1182C sichern Sie sich eine längere Standzeit, eine höhere Abtragsrate und Verschleißbeständigkeit. Diese Funktionen und Vorteile können entweder bereits automatisierte Prozesse verbessern oder die Automatisierung gegenüber den derzeitigen manuellen Prozessen attraktiver machen. Wenn Sie mehr erfahren möchten, wenden Sie sich an das 3M Expertenteam von Anwendungsingenieuren für das Roboterschleifen – dieses arbeitet auf Ihrem Weg zur Automatisierung gerne mit Ihnen zusammen – von der Idee bis zur Umsetzung.
This file is used in particular for processing tools in the wood and machine industry. The different grit sizes allow you to customise your tool to suit your application. Silicon carbide files are mainly used for carbide or carbide-tipped tools and have a grey-green colour. Orange coloured files are mainly used for all types of steel and stainless steel.
€1.95*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.