3M high performance sealing tape 4411G, 125 mm x 33 m, 1 mm, gray

This aggressive BASIC grinding disc for stone offers fast and comfortable working without great effort. It is ideal for soft to hard stone, natural and artificial stone and concrete. This grinding disc with silicon carbide is especially suitable for stone and short-chipping materials.

Very high-quality non-woven fabric for a particularly long service life. Produces a shadow-free industrial finish (matting, satinising). Also suitable for pre-polishing, removing oxide layers and levelling "pre-polished" Sheets and smoothing surfaces. With vibration-damped sleeve for 1-fold, 2-fold and 4-fold splined shaft, thus 100 % concentricity.

The 3M Peltor safety helmet G3001 with 3M Uvicator sensor was developed in close cooperation with industry and forestry and fulfils the highest protection requirements. The G31NUW model made of UV-stabilised ABS plastic is white and equipped with a headband with ratchet fastening system and PVC welding strap. The ratchet fastening system ensures extremely precise and simple adjustment to the wearer's head size. The non-ventilated helmet shell provides reliable insulation against electrical hazards. The extra short peak ensures optimum visibility. The slim, round shape also reduces the risk of getting caught on branches, for example. The 3M Peltor G3001 also offers an advantage when working in confined spaces or climbing in trees: the interior can be rotated through 180° so that the safety helmet can also be worn with the peak on the back of the neck. Thanks to the special profile design, it is also easy to attach earmuffs or visors. Particularly practical: the patented 3M Peltor Uvicator sensor indicates when the helmet has lost its protective effect due to excessive UV radiation and should be replaced. The 3M Peltor safety helmet G3001 with 3M Uvicator can be used, for example, in industry for electrical work up to 440V. The safety helmet has also been tested and approved in accordance with EN50365:2002. The helmet is suitable for head widths from 53 - 62 cm

The anti-slip tape consists of anti-slip aluminium oxides in a tough, durable polymer, firmly bonded to a flexible PVC film. The reverse side is equipped with a pressure-sensitive adhesive based on solvent acrylate, which in turn is protected by a removable liner. The anti-slip tape provides a non-slip surface for a variety of applications. Durable anti-slip coating for all smooth, wet or smeared surfaces in industry and commerce with intensive pedestrian and light vehicle traffic. wherever a permanently good slip resistance is required despite heavy use and heavy soiling (in agriculture and forestry, in road construction, building construction and civil engineering, on lorries, tractors, construction vehicles, cranes, construction machinery, etc.). For outdoor applications, we recommend 3M Safety Walk edge protection.

For cleaning, derusting, removing scratches, longitudinal grinding.

With 3M Fasara glass design films, glass surfaces can be stylishly designed with ease, even retrospectively: The self-adhesive polyester films are ideal for creating privacy in glass-emphasised architecture (offices, meeting rooms) and offer a wide selection for decorative applications on glass. The application is  simple, quick and does not require any removal of the existing glass during processing.