Starter set: 1x 3M Scotch-Weld 2-component construction adhesive EPX System DP8005, black, 45 ml 1x S-K-S hand tool for EPX 38 to 50 ml cartridges incl. feed piston 2:1

Variants

Farbe

Reset selection

€76.27* % €0.00* (0.00% saved)

Unit price: €76.27* % €0.00*

Unit price (net): €64.09 % €0.00

Contents: 0.045 liter (€1,694.89* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

Note Delivery cannot be made to private individuals. Delivery may only be made to resellers, professional users or public research, testing or teaching institutions if we have complied with the attached Chemicals Prohibition Ordinance completely filled out and signed by you.

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "Starter set: 1x 3M Scotch-Weld 2-component construction adhesive EPX System DP8005, black, 45 ml 1x S-K-S hand tool for EPX 38 to 50 ml cartridges incl. feed piston 2:1"

3M Scotch-Weld DP8005 is a viscoplastic 2-component construction adhesive based on acrylate that cures at room temperature. The product is characterised by rapid strength development, high final strength and short processing time, and also impresses with its excellent resistance to water, moisture and media. Scotch-Weld DP 8005 enables the structural bonding of low-energy plastics such as PE, PP and TPE (thermoplastic elastomers) without surface pre-treatment. Plastics such as ABS, rigid PVC, PC, PMMA and fibre composites as well as metals, glass, wood etc. can also be bonded with good strength.

1x 3M Scotch-Weld 2-component acrylate-based structural adhesive for the EPX system DP 8005, black, 45 ml Art. 13166

1x S-K-S hand tool for EPX 38 to 50ml cartridges incl. feed piston 2:1 & 10:1 Art. 11537

3x 3M Scotch-Weld EPX mixing nozzle 45ml Art. 35886

Properties

Processing time of 2 to 3 minutes
Tough and elastic
High shear strength on PE / PP
Good peel strength
Good impact resistance
Mixing ratio 10:1
Contains glass beads for adjusting the adhesive layer thickness

Advantages

Very short processing time
Fast strength build-up
Bonding of low-energy plastics without pre-treatment of the surfaces

Product benefits

Initial loading of the bonded parts possible after a very short time
Successful bonding on low-energy surfaces
Successful bonding on low-energy surfaces

Field of application

Bonding of PE and PP as well as TPE
Also bonds other plastics such as ABS, rigid PVC, PMMA, plus fibre composites, painted, primed metals, glass, wood, etc.

Questions about the article?

Signal word

Danger

Hazard pictogram(s)

Ausrufezeichen

Gesundheitsgefahr

Hazard statement / CLP

H317 May cause an allergic skin reaction.
H360D May damage the unborn child.
H412 Harmful to aquatic life with long lasting effects.

Prevention

P201 Obtain special instructions before use.
P280E Wear protective gloves.

Reaction

P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P308+ P313 IF exposed or concerned: get medical advice/attention.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 14501

SAP number: 14501

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Downloads

Download data sheet as PDF

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M Scotch-Brite Hand pad CF-HP 7447+, red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S pressure roller with rubber roller diameter=30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

Customers also bought

3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8005, black, 45 ml

Contents: 0.045 liter (€866.89* / 1 liter)

€39.01*

3M Scotch-Weld EPX mixing nozzle for 45ml cartridges 3M DP8405NS DP8407NS DP8410NS DP8425NS DP8725 DP8805NS DP8810NS DP8825NS DP8010 DP8005

3M Scotch-Weld 2-component construction adhesives are processed with the EPX system: dosing - mixing - application takes place in just one work step. The actual construction adhesive is created within the mixing nozzle for 45ml cartridges through the chemical reaction of both components.

€1.38*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

Variants from €19.99*

€16.99*

3M SecureFit 400 safety spectacles, black/green temples, anti-scratch/anti-fog coating, clear lens, SF401AS/AF-EU

The 3M SF 400 SecureFit series is an extension of the successful SecureFit range. The 3M SF 400 SecureFit safety spectacles consist of frameless lenses with temples that are equipped with special 3M technology. The pressure of the temples on the ears is evenly distributed, significantly increasing wearer comfort. This innovative design ensures that the glasses fit securely and comfortably. Adjustable nose pads and soft-touch temple inlays offer even more comfort.

Variants from €7.83*

€8.65*

3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8010, blue-green, 45 ml

Scotch-Weld DP8010 is a solvent-free, viscoplastic, two-component structural adhesive based on modified acrylates that cures at room temperature. The product was developed for the structural bonding of low-energy plastics such as PE, PP and TPE (thermoplastic elastomers) without surface pre-treatment such as corona, plasma etc.. Other plastics such as ABS, rigid PVC, PMMA, PS, PC, fibre composites, as well as glass, wood, etc. can also be bonded with good strength. Metals should be primed or painted beforehand. The product is characterised by high strength, short processing time and rapid strength development (inherent strength of the plastics) as well as excellent resistance to water, moisture and media.

Contents: 0.045 liter (€866.89* / 1 liter)

€39.01*