Tyrolit Flat file BxCxL 6x3x100 Ceramic bonded, shape: 9010, Art. 556

Experience a new dimension in cutting. The ceramic precision abrasive grain with two active cutting edges enables uncompromising cutting performance, even at low pressure. This cutting disc cuts all types of metal effortlessly with minimal burrs and tarnishing.

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.

Our 3M Double-Sided Splicing Tape for Flying Splice Roll Change R9996 is a double-coated, water-dispersible splicing system for most lightweight paper grades in manual and automatic splicers for flying splice tape applications.

The spacer films in the 3M 200MP adhesive series are designed in particular for the manufacture of membrane keypads and front panels, for snap-on disc positioning or as self-adhesive circuit films. The series is shear-resistant (even with narrow webs) and chemically compatible with various conductive pastes and special colours. The spacer films, which are temperature-resistant from -40°C and up to +120°C (up to +150°C for short periods), are characterised by very high transparency and UV light resistance and are permanently elastic and resistant to ageing. The spacer films do not bleed at the punched edges.

The TYROLIT NATURAL FIBRE DISC is a new, unique abrasive disc that combines aggressiveness with high working comfort thanks to a ceramic grain. Maximum service life and an environmentally friendly jute fibre backing deliver top performance. An additional backing pad is not required as it is already integrated into the product. This natural fibre backing can be trimmed and is therefore superior to other discs in terms of service life. This saves the user time and enormous costs.

When developing the 3M Cubitron II fibre disc 982CX Pro, 3M engineers reformulated the groundbreaking technology behind the 3M  Cubitron II abrasives. This revised 3M precision-moulded grain offers even faster stock removal and even longer life to make your work even more productive. The advantage of a complete system 3M Cubitron  II fibre disc 982CX Pro is part of a complete sanding system for the angle grinder. When you combine 3M Cubitron II discs with our pneumatic angle grinder and high-performance backing pads, you are ready for a new level of productivity with less vibration, noise and dust. When these components are used together, they reinforce each other's effectiveness and offer optimum abrasive performance - also in terms of abrasive life, stock removal and consistency. Setting standards across industries When developing the 3M Cubitron II fibre disc 982CX Pro, we had your industry in mind. In metalworking, the 982CX Pro does a great job on metals from mild steel to sheet metal. With a wide range of applications in shipbuilding, boatbuilding and metalworking, it masters the challenges specific to your industry. In mechanical engineering, these fibre discs are unbeatable for hard work in agriculture and construction, for industrial machinery, in food processing or for oil and gas plants. Robot technology with maximum efficiency Automated grinding processes are only as efficient as the abrasives used for them. Leading robotic system integrators around the world rely on 3M Cubitron II fibre discs for their legendary performance and ability to reduce downtime. The redesigned shaped ceramic grain of the 3M Cubitron II 982CX Pro fibre disc allows robots to finish welds and maximise efficiency long after other fibre discs have had to be replaced.