3M High Performance Nozzle Head for Pressure Cups Performance Pressure HVLP Atomizing Head Refill Kit 26818, Clear, 1.8 (Pack=5pcs)

The maintenance kit for the 3M high performance spray gun contains the spare parts required for the complete maintenance of the 3M high performance spray gun. It is ideal for reducing downtime at work and for quick and easy reassembly of the spray gun. Using the included instruction manual, users can disassemble the spray gun to replace its needle, springs, seals, all original fasteners and other parts. The kit includes a welded replacement frame and an outer locking ring. After servicing, the spray performance of the 3M high performance spray gun is equivalent to a new spray gun. Note: Do not carry out any maintenance or servicing work on the spray gun other than that specified in the operating instructions. For use with the 3M high performance spray gun. It is made of an impact-resistant composite material and is one of the lightest spray guns in the industry. At the same time, it is robust enough for demanding conditions in the light and automotive industries. The versatile design allows painters to spray from a pressurised source or a gravity feed cup. The interchangeable nozzle head allows you to apply different coatings, while each new nozzle gives you spray performance comparable to a brand new machine.

The ball valve for the 3M high performance spray gun is an accessory for the 3M™ high performance spray gun system and is intended as a pressure spray head. The ball valve allows the spray gun user to stop the flow of paint from the pressure source (tank or pump) at the end of the spray gun paint hose. It is recommended for use when the painter does not have easy access to the pressure source. Lightweight and easy to use.

The pin for the pressure hose for the 3M high performance spray gun is a replacement fastening pin for the pressure hose for the 3M high performance spray gun. The clevis pins are used to securely attach the pressure hose to the 3M™ High Performance Paint Gun. The connection gives the painter additional control. It also prevents the nozzle head from rotating or being subjected to unwanted loads.

The pressure hose for the 3M high performance spray gun is connected to the 3M high performance spray gun for pressurised applications. Provides a quick connection of the nozzle head to the pressurised paint hose. Attaches securely to the spray gun for better balance and hose control. Can optionally be used with a ball valve for paint control from the pressure line.

3M HVLP high performance nozzle heads for pressure cups provide excellent spray performance for coatings such as paints, primers, base coats, top coats, clear coats and adhesives. Replaceable nozzles have been specially developed for pressurised applications. These are used with the 3M high performance spray gun, which ensures a spray performance comparable to a completely new device every time the nozzle is changed.   What makes the 3M high performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance with every application, every day. 3M HVLP High Performance Nozzle Head Replacement Kits for Pressure Cups are available with 0.9, 1.1, 1.4, 1.8 and 2.0 size nozzle heads for a wide range of industrial and automotive coatings. They are suitable for high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M high-performance spray gun system. They are attached to the paint hose provided for this purpose and ensure continuous spray application from a pressurised container or tank. The nozzle heads are attached to the pressure hose of the 3M high performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for changing. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

The 3M Heavy Duty Spray Gun is our industrial painting solution that allows you to standardise your operations and increase productivity by providing painters with a smarter way to spray. Lightweight and easy to use, the 3M Heavy Duty Spray Gun is designed for industrial painting applications. Made from a high-quality, impact-resistant composite material, it is one of the lightest paint spray guns in the industry. At the same time, it is robust enough for the toughest industrial conditions. From the trigger to the housing, the spray gun has been optimised by motion scientists to improve comfort - especially for the high demands of daily spraying. The versatile design allows painters to spray from a pressurised source or a gravity feed cup. The pressurised hose and nozzles ensure continuous application - even for large jobs. For spot repairs and small areas, you can also customise the spray gun so that it can be used with the 3M PPS 2.0 paint application system. In this way, you use exactly the right amount of coating that you need for the job in hand. The simple, innovative design means fewer parts to maintain. With the interchangeable quick-change nozzles, paint does not run through the entire body of the spray gun. Cleaning is simple: all you have to do is wipe the tip of the paint needle and replace the nozzle head; there is no need to dismantle the spray gun or soak it in solvent. Every time you replace the nozzle, you practically get a brand new spray gun. The 3M high performance nozzle head is available in sizes from 1.1 to 2.0, allowing you to easily apply a variety of coatings - from paints and fillers to top coats and even adhesives. The set includes: 1 spray gun, 6 gravity atomiser heads, 6 pressure atomiser heads, 1 locking ring, 1 pressure whip, 1 air control valve, 1 standard size PPS 2.0 mixing cup with 5 inserts and 5 lids, 3 sealing plugs.

3M HVLP high performance nozzle heads for pressure cups provide excellent spray performance for coatings such as paints, primers, base coats, top coats, clear coats and adhesives. Replaceable nozzles have been specially developed for pressurised applications. These are used with the 3M high performance spray gun, which ensures a spray performance comparable to a completely new device every time the nozzle is changed.   What makes the 3M high performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance with every application, every day. 3M HVLP High Performance Nozzle Head Replacement Kits for Pressure Cups are available with 0.9, 1.1, 1.4, 1.8 and 2.0 size nozzle heads for a wide range of industrial and automotive coatings. They are suitable for high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M high-performance spray gun system. They are attached to the paint hose provided for this purpose and ensure continuous spray application from a pressurised container or tank. The nozzle heads are attached to the pressure hose of the 3M high performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for changing. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

The 3M high performance spray gun was developed for modern painters and offers them a smarter way of application. It is made from a high-quality, impact-resistant composite material and is one of the lightest paint spray guns in the industry. At the same time, it is robust enough for the toughest industrial conditions. From the trigger to the housing, the spray gun has been optimised by motion scientists to improve comfort - especially for the high demands of daily painting work. The versatile design allows painters to spray from a pressurised source or a gravity feed cup. The pressurised hose and nozzles ensure continuous application - even for large jobs. For spot repairs and small areas, you can also customise the spray gun so that it can be used with the 3M PPS 2.0 paint application system. In this way, you use exactly the right amount of coating that you need for the job in hand. The simple, innovative design means fewer parts to maintain. With the interchangeable quick-change nozzles, paint does not run through the entire body of the spray gun. Cleaning is simple: all you have to do is wipe the tip of the paint needle and replace the nozzle head; there is no need to dismantle the spray gun or soak it in solvent. Every time you replace the nozzle, you practically get a brand new spray gun. The 3M high performance nozzle head is available in sizes from 1.1 to 2.0, allowing you to easily apply a variety of coatings - from paints and fillers to top coats and even adhesives.