3M PPS Type V lid and cup kits, 0.4l, 200u, 50 cups, 50 lids #16152

3M Acrylic Plus adhesive tape made from a black acrylic foam with additional acrylic adhesives on both sides. Typical applications are fixings of rigid add-on parts such as spoilers, sills, aerial housings, roof rails and wheel arch extensions etc. where an aesthetically pleasing visible edge is required. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. The unique viscoelastic properties of PT1100 provide excellent stress relief in the bonded seam, resulting in extremely durable joints.

3M Acrylic Foam Adhesive Tape consisting of a grey acrylic foam with additional acrylic adhesive on one side. GTE6208 is characterised by good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. The self-adhesive (SK) side is laminated to pre-treated plastic add-on parts and then applied to the painted bodywork or ABS. Typical applications include the attachment of add-on parts such as bumper protection strips, pillar trims, chrome strips and emblems.

The 3M Accuspray nozzle head for the PPS 2.0 series ensures excellent atomisation for a wide range of coatings and is an integral part of the 3M Accuspray spray gun system. These interchangeable, reusable nozzle heads are available in a range of sizes for optimum atomisation whether you are applying low viscosity coatings such as water-based materials, solvent-based paints or higher viscosity coatings. The heads are easy to clean, reuse or can be easily removed and replaced to have the performance of a new spray gun when needed. Other benefits include reduced priming requirements, shorter application and cleaning times and a better finish, reducing the need for sanding. Each replaceable nozzle head is made of clear plastic so technicians can always see if the head is clean, reducing the need for cleaning. The 3M Accuspray™ nozzle head for the 3M PPS 2.0 series is available in 3 colour-coded sizes: The 1.4 mm nozzle heads guarantee fine atomisation with minimal spray mist, making them ideal for lower viscosity paints such as sealing lacquers, varnishes, top coats and light adhesives in the automotive industry. The interchangeable 1.8 mm nozzle heads are ideal for medium to high viscosity coatings such as paints and adhesives in the automotive industry. The 2.0 mm nozzle heads are normally used with our 3M Accuspray HGP spray gun, which is specially designed for the application of high volume, high viscosity fluids. Use these heads for the application of gelcoat coatings, adhesives, primers, thick film primers and speciality and sound deadening coatings. Other benefits include less primer required, shorter application and cleaning times and a better finish, which reduces the amount of sanding required. Only compatible with the 3M PPS 2.0 series.

The 3M Accuspray gun HG14, together with the 3M Accuspray nozzle heads and the 3M PPS cup system, optimises the filler application process in every paint shop. The nozzle heads can be replaced after each application in just three simple steps. You save yourself the hassle of cleaning the filler gun and have a virtually new device for every application. The 3M Accuspray system works with the proven HVLP technology (High Volume Low Pressure). This ensures a smooth surface and ideal layer thickness of the filler. Time-consuming sanding is thus reduced to a minimum. In addition, hardly any spray mist is produced, which noticeably reduces material consumption and is also good for your health. The 3M Accuspray gun weighs just 324 grams and has excellent ergonomics. This means that it is easy to apply filler even in hard-to-reach places and from any angle. This increases your productivity and saves material, time and costs.

The TYROLIT FAST CHANGE enables very fast disc changes thanks to the Velcro fastener. The stable paper backing enables high-speed sanding on many surfaces. This product gives you a particularly even finish on lacquers, paints and composite materials. In addition, a special stearate layer reduces clogging and clogging of the disc, thereby increasing its service life.

The TYROLIT FAST CHANGE enables very quick disc changes thanks to the Velcro fastener. The heavy paper backing allows it to be used on soft materials such as wood or paint and for stubborn work. This product has a particularly stable backing that supports the grit for maximum removal rate and service life. It is also particularly resistant when used on edges.

Scotch-Weld DP8010 is a solvent-free, viscoplastic, two-component structural adhesive based on modified acrylates that cures at room temperature. The product was developed for the structural bonding of low-energy plastics such as PE, PP and TPE (thermoplastic elastomers) without surface pre-treatment such as corona, plasma etc.. Other plastics such as ABS, rigid PVC, PMMA, PS, PC, fibre composites, as well as glass, wood, etc. can also be bonded with good strength. Metals should be primed or painted beforehand. The product is characterised by high strength, short processing time and rapid strength development (inherent strength of the plastics) as well as excellent resistance to water, moisture and media.

Thanks to their flexibility, these tools adapt perfectly to any workpiece contour. The radially arranged flaps of the flap points can be used on different materials and allow precise work for different applications such as matting, pre-polishing and cleaning surfaces. The highly flexible flaps also make it easy to work on hard-to-reach areas.

With 3M PELTOR WS ALERT headset covers you can replace your old covers and give your WS ALERT headset the colour of your choice. They fit both the headband and helmet-mounted versions and are available in many different colours.   3M PELTOR is now established as the world's leading brand of hearing protection and communication solutions. With production facilities in several countries, including the USA, 3M PELTOR provides innovative solutions for various industries worldwide, including elite special forces and law enforcement. The PELTOR brand is built tough for professional use. Contact us today to learn how PELTOR protective communication solutions can protect your employees while increasing productivity.

The 3M Virtua safety spectacles 715001AF-BULK are frameless safety spectacles with an enveloping design for full protection. It has moulded, flexible temples for greater comfort. The integrated side shield provides additional protection against flying particles. The clear lens has an anti-scratch and anti-fog coating. Use an inexpensive disposable eye protection for visitors: the 3M Virtua AF safety spectacles 715001AF-BULK. Our safety spectacles offer good protection and a wide field of vision with their enveloping design. The moulded, flexible temples ensure a tight and comfortable fit. The clear lens offers maximum clarity and has an anti-scratch and anti-fog coating.