3M Scotch-Brite Non-woven tape SC-BS, 50 mm x 450 mm, A, very fine #37190

Materials that can be processed: Asphalt, fresh concrete with soft to hard material aggregates and some old concrete. Details: Protective segments against undercutting effect.

The 3M EC cold-shrink end cap is made of EPDM elastomer and protects cables, pipes and other cylindrical objects against the ingress of dirt and moisture as well as mechanical damage. The rubber tubing is closed on one side, on the other it is pre-stretched onto a support spiral. When the spiral is pulled out, the end cap shrinks down and forms a secure, abrasion-resistant seal against moisture thanks to a constant radial contact pressure. It fulfils the requirements of ANSI C119.1 and is therefore suitable for indoor and outdoor applications as well as for underground or underwater installation. Its good thermal stability and resistance to decay, acids, alkalis, ozone and UV radiation guarantee long-lasting functionality. No additional tools such as shrink torches are required for installation. The cold-shrink end cap does not require an adhesive inner coating for sealing and can therefore be easily removed without leaving any residue by simply cutting it open. Reliable protection against moisture and dirt - the cold-shrink end cap impresses with its high resistance.

This grinding disc is suitable for steel and stainless steel applications thanks to its softer design. In addition, the BASIC 2in1 offers fast and comfortable working without great effort. This tool can be used universally and can be used for both surface and edge grinding.

The three-dimensional fibre fleece of the Scotch-Brite flap brush PF-ZS produces a dense, matt finish without damaging the workpiece. Thanks to the soft, flexible flap construction, an even surface is produced without chatter marks. The 6 mm shaft is used for direct mounting on flexible shafts, straight grinders and drills. No additional accessories are required.

For the individual "Hardness adjustment" of the respective zirconia, ceramic, SC fleece, Trizact, SuperPolish, BRIGHTEX and felt sleeves, this inflatable roller is recommended. It is particularly suitable for surface and edge grinding. Can also be inflated with any bicycle pump (adapter included).

The 3M polyurethane seam sealers consist of a high-strength 1-component adhesive sealant and cure to a robust, flexible material within 24 hours in humid conditions.  (The curing speed depends on the bead thickness and the ambient conditions) Temperature resistant from -40 °C to +90 °C (up to 120 °C for short periods). Ideal for sealing medium-width and wide car body joints and weld seams. Also suitable for wood and plastic. Can be applied directly to bare steel; suitable as a weld-through sealant. The product must still be moist (within 35 minutes of application). The product must cure (at least 45 minutes) before applying water-based basecoats.