3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP 410, beige, 400 ml

Variants

Reset selection
€128.01* % €0.00* (0.00% saved)
Unit price: €128.01* % €0.00*
Unit price (net): €107.57 % €0.00
Contents: 0.4 liter (€320.03* / 1 liter)
Delivery time 2-5 days working days

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.
Product information "3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP 410, beige, 400 ml"

3M Scotch-Weld DP410 is a viscoplastic 2-component construction adhesive based on epoxy resin for the EPX system. The product with short processing time achieves very high peel strength, high shear strength and is characterised by good ageing properties. Scotch-Weld DP 410 was developed for bonding metals, plastics such as ABS, PA, PC, rigid PVC etc. as well as fibre composites.

Properties
  • Processing time of 8 to 10 minutes
  • Tough elastic
  • High shear strength
  • Good peel strength
  • Good impact strength
  • Very high peel strength
  • Good ageing properties
  • Mixing ratio 2:1
  • Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.

Advantages
  • Very short processing time
  • Good ageing properties
Product benefits
  • Initial loading of the joined parts possible after a very short time
Field of application
  • Bonding of metals, plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites
Signal word
Danger
Hazard pictogram(s)

Ätzwirkung

Ausrufezeichen

Hazard statement / CLP

H314 Causes severe skin burns and eye damage. 
H317 May cause an allergic skin reaction. 
H412 Harmful to aquatic life with long lasting effects.

Prevention

P260A Do not breathe vapour. 
P280D Wear protective gloves, protective clothing and eye/face protection.

Reaction

P303 + P361 + P353A IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. 
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. 
P310 Immediately call a POISON CENTER or doctor. 
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Article no: 12165
Part number: 410400
SAP number: 7100261679
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
Enquiry form

Zubehör

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm
Breite in mm: 45 mm | Typ: S-K-S
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*
S-K-S 550 Cleaner Isopropanol 99.9% 1 liter
ml: 1000 ml
The  surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to  . The product is intended for industrial / professional use only.

Variants from €19.99*
€16.99*
3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine
Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*
S-K-S 560 Lime-based industrial cleaner, clear, 500 ml
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*
3M VHB cleaning cloths 150mmx150mm
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

Customers also bought

S-K-S professional cutter knife metal 18mm, incl. one snap-off blade, 15 segments l 14 snap-off points
The cutter knife consists of a metal housing. The knife handle is ergonomically shaped and sits securely in the hand thanks to its non-slip surface.

€4.74*

Recently viewed products

3M Scotch-Brite Microfibre fleece 2060, green, 360 mm x 400 mm
For quick and easy daily maintenance cleaning. The new microfibre technology of Scotch-Brite Microfibre Fleece 2060 removes fingerprints, grease, dust, dirt and water streaks from mirrors, glass, ceramics, stainless steel, chrome, aluminium and plastic without leaving streaks. Soft, textile feel. Washable up to 95°C. Application safety due to support of HACCP requirements via the colour.

Contents: 0.4 meter (€4.33* / 1 meter)

Variants from €1.69*
€1.73*
3M MDT-A Medium-wall heat-shrink tubing with adhesive, black, 32/7.5 mm, 1 m
The 3M MDT-A heat-shrinkable tubing is a halogen-free, medium-walled heat-shrinkable tubing made of radiation cross-linked polyolefin with a hot-melt adhesive coating. The hot-melt adhesive penetrates into all uneven areas and cavities and prevents the ingress of moisture. The 3M MDT-A heat-shrinkable tubing is suitable for insulating plastic and earth cables up to 0.6/1kV, both for installation in the open air and in the ground. The ageing-resistant heat-shrinkable tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink rate of 4.5 to one, you can cover large diameter jumps with just one tube. The 3M MDT-A heat shrink tubing fulfils the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS-compliant.

Variants from €9.06*
€16.34*
3M Speedglas Versaflo disposable lightweight hood S333S, with integrated head holder, size S/M with Adflo blower respirator with QRS air hose, adapter, air flow meter, pre-filter, spark arrester, particle filter, lithium-ion battery and charger
The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo disposable lightweight bonnet S333SG with integrated head holder, grey, robust, crackle-free and low-lint material, size S/M Material: Ventflex

Variants from €903.96*
€943.91*
3M PELTOR WS LiteCom PRO III GB Headset, 32 dB, PMR446 MHz, Analogue / Digital, Helmet-mounted, MT73H7P3E4D10EU GB
The hearing protection with integrated analogue and digital DMR  radio enables two-way radio communication and can be integrated into DMR radio systems. Thanks to the Multipoint Bluetooth® interface, two devices can be connected via Bluetooth (e.g. mobile phone and a Bluetooth-enabled radio). electronically controlled external microphones make it possible to hear important ambient noises and communicate with bystanders without having to forego the hearing protection function. The 3M PELTOR WS LiteCom Pro III headset in warning colour is a hearing protector with built-in, pre-programmed analogue/digital radio for the licence-free PMR 446 range*, level-dependent electronic control, Bluetooth® function and external connection socket. 1 x 3M PELTOR WS LiteCom Pro III headset, 1 x rechargeable battery (ACK081), 1 x FR08 mains cable, 1 x AL2AI cable (for ACK081), 1 x HY83 hygiene set, 1 x operating instructions

€1,355.46*
3M polyester adhesive tape 396, transparent, 6 mm x 33 m
Scotch adhesive tape 369 is a standard packaging tape. The bi-axially stretched polypropylene film backing is coated with a synthetic rubber adhesive (solvent-free) which has good shear strength and initial holding and strength and test liner cartons. Transparent adhesive tape with extremely high instant adhesion, for splicing, fastening, reinforcing and repairing, fastening the end of rolls of plastic fabric tapes.

Contents: 33 meter (€0.15* / 1 meter)

€5.01*
Tyrolit C-P65 P E TFC D 125 For hard stone, steel, composite materials, plastics and soft stone, P120, mould: DISC, Art. 6964
The TYROLIT FAST CHANGE enables very quick disc changes thanks to the Velcro fastener. The thin paper backing makes this disc ideal for fine finishing. You get a very even finish on metals, paints, composite materials, marble and stone. This product gives you a particularly even finish on hard stone, steel and composite materials. In addition, you reduce clogging and clogging of the disc and thus increase the service life.

€0.37*
Average product rating
4.93/5
Store reviews
Score is calculated from 1232 reviews from the last 12 months out of a total of 3198 reviews.
09.04.2024
.