3M short visor X5-SV01-CE for safety helmets X5000 and X5500, transparent, anti-fog and anti-scratch coating, polycarbonate

The 3M SecureFit 400 safety spectacles are our all-round eye protection with clear, stable and scratch-resistant polycarbonate lenses. Padded sections in the temple area over the ears and soft, customisable nose pads ensure a comfortable fit. This lightweight design weighs just 19 g and attracts attention with its bold neon green temples.

With the practical 3M One Touch Pro hearing protection dispenser, hearing protection is always ready when needed. A simple grip is all it takes: the dispenser always dispenses exactly one earplug. No more wastage and waste from individually packaged earplugs. The dispenser made of ABS plastic with a powder-coated steel rear panel is designed for use in demanding environments - both indoors and outdoors.

The 3M Peltor Optime III earmuffs were developed as high-performance hearing protection for workers in extremely noisy environments such as airports, engine rooms on ships, power stations and printing plants.

The 3M Aura 9322+ folding mask allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with good visibility: the sealing points on the top of the mask reduce the fogging of glasses - especially in combination with its 3M Cool Flow exhalation valve. This  valve increases wearing comfort, especially in hot and humid environments, as it allows respiratory heat and moisture to escape easily. The new filter technology also ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 68% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap allows the mask to be easily positioned, ensuring a good fit and a secure seal. The 3M Aura respirator 9322+ is hygienically individually packaged and has protection level FFP2 NR D. The application limit is 10 times the limit value for particles. It is used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. Approval according to standard EN 149:2001+A1:2009.

With the 3M SecureFit Safety helmet X5501V-CE provides you with safe and comfortable head protection. The safety helmet was designed for general industrial use and everyday safety requirements. Inspired by modern climbing helmets, it offers protection against small falling objects. Optional ventilation openings allow air to flow through the helmet. The helmet height on the head is adjustable. With the easily adjustable 4-point ratchet fastening system, the head strap can be conveniently adjusted to suit requirements. Integrated into the helmet is the exclusive, patented 3M Pressure distribution technology is integrated into the helmet. It not only ensures a secure fit, but also improves wearer comfort. This technology reduces the force on the head by up to 20% compared to conventional 3M helmet straps. The rimless design allows an unobstructed view upwards. This makes it easier to see and avoid potential hazards in the surrounding area. This white safety helmet is equipped with a patented 3M UVicator Sensor, which changes colour from red to white when exposed to harmful UV radiation. Exposure to UV radiation can cause the helmet shell to become brittle, limiting effective protection. The colour change of the sensor indicates when the helmet should be replaced. Optional 3M Scotchlite Reflective material increases visibility in poor light conditions. The existing notches and holders for accessories are compatible with a wide range of 3M protective visors, earmuffs and other accessories. A chin strap with magnetic or plastic fastener can also be added as an option. Tested for lateral deformation and fulfils the EN 397 standard for industrial safety helmets.

The 3M SecureFit safety helmet X5001V-CE provides you with safe and comfortable head protection. The safety helmet is ideal for a wide range of work situations, both for working at height and in locations where heavy machinery is in use or other hazards are to be expected. Our ventilated safety helmet complies with the certification requirements of the EN 12492 and EN 397 standards. Thanks to the special adjustment system with 4-point chin strap, the safety helmet can be easily adjusted to one or the other standard depending on the safety requirements of the workplace. Inspired by modern climbing helmets, the rimless design allows an unobstructed view upwards. This makes it easier to see and avoid potential hazards in the surrounding area. With six different settings, the length of the straps at the front and back can be adjusted to suit different head shapes. With the easily adjustable 6-point ratchet fastening system, the headband can be conveniently adjusted to suit requirements. The exclusive, patented 3M pressure distribution technology is integrated into the helmet. It not only ensures a secure fit, but also improves wearer comfort. This technology reduces the force on the head by up to 20% compared to conventional 3M helmet straps. 3M Scotchlite reflective material increases visibility in low light conditions. This white safety helmet is equipped with a patented 3M UVicator sensor, which changes colour from red to white when exposed to harmful UV radiation. Exposure to UV radiation can cause the helmet shell to become brittle, limiting effective protection. The colour change of the sensor indicates when the helmet should be replaced. The existing notches and brackets for accessories are compatible with a wide range of 3M protective visors, earmuffs and other accessories. Note: The X5000 can be worn in either EN 12492 (mountaineering helmets) or EN 397 (industrial safety helmets) mode, but it cannot fulfil both EN standards at the same time.