3M Spray Adhesive Display Mount 050792, 400 ml, beige

The professional painter's masking tape adheres reliably to smooth surfaces. Ideal for glass, plastic, tiles and metal, indoors and outdoors. It ensures sharp coloured edges and can be removed without leaving any residue for up to 14 days.

The cutter knife consists of a metal housing. The knife handle is ergonomically shaped and sits securely in the hand thanks to its non-slip surface.

The professional painter's masking tape adheres reliably to smooth surfaces. Ideal for glass, plastic, tiles and metal, indoors and outdoors. It ensures sharp coloured edges and can be removed without leaving any residue for up to 14 days.

The 3M spray adhesive Photo Mount 050777 is a professional spray adhesive for the permanent mounting of photos, posters and billboards. The spray adhesive is ideal for photos, documents, drawings, printed material and maps. It sticks permanently - a short-term correction is still possible (less than 5 minutes). The 3M Photo Mount is non-ageing and resistant to high temperatures and UV light. The spray adhesive does not bleed through and is invisible after drying. It does not discolour.

The 3M Aura 9320+ folding mask allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with good visibility: the sealing points on the top of the mask reduce the fogging of glasses. The new filter technology ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 68% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap allows the mask to be easily positioned, ensuring a good fit and a secure seal. The 3M Aura respirator 9320+ is hygienically individually packaged and has protection level FFP2 NR D. The application limit is 10 times the limit value for particles. They are used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. Approval according to standard EN 149:2001+A1:2009.   EAN single pack:  4046719487325 EAN bulk pack:  4046719487332   <strong>We receive the masks from 3M as so-called "bulk goods" with approx. 440 pieces in a box. We as SKS repack the goods to your ordered quantity in neutral boxes. You will therefore receive the 3M 9320+ hygienically individually packed but not in the original 3M carton. Masks with sub-packaging of 10/12 or 20 pieces can no longer be supplied by 3M for over 1 year.   A pack of 20 contains 20 individually packed masks.

The  surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to  . The product is intended for industrial / professional use only.