As we make up our own adhesive tapes (cut to size), there may be a tolerance of 1-2 mm on the first roll.
0 from 0 Reviews
Give us a rating!
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
35740
SAP number:
35740
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.
Breite in mm:
158 mm
|
Farbe:
Red
|
Körnung:
Very fine
|
Länge in m:
0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.
3M Scotch-Weld DP610 is a flexible 2-component polyurethane-based construction adhesive for the EPX system. The transparent product with short processing time is characterised by UV resistance (no yellowing), high flexibility, high peel strength as well as good ageing properties and weather resistance. Scotch-Weld DP 610 was developed for bonding plastics such as ABS, PET, PC, PS as well as painted, primed metals, glass, etc.
Dosing - mixing - application in just one operation - for consistent and defined quality. withstands high dynamic loads 3M Scotch-Weld™ DP 100 plus is suitable for bonding a wide range of materials in many applications. DP 100 plus bonds metals such as aluminium and steel, fibre composites, plastics such as ABS, PC, PMMA and PVC as well as glass, ceramics and wood. Very good flow behaviour DP 100plus is characterised by high shear, peel and impact strength as well as good flexibility. Due to these properties, the product is suitable for applications in the automotive and automotive supply industry, in special vehicle construction, in metalworking and for the manufacture of sporting goods. Possible applications Bonding of glass to metals Bonding of jewellery - for transparency and good optics Bonding of plastics such as ABS, PC, PMMA, PVC etc. bonding of plastics such as ABS, PC, PMMA, PVC etc. Maximum strength under challenging conditions Very suitable for potting - good thermal properties Working time at room temperature 5 minutes - hand strength after 20 minutes 3M Scotch-Weld DP100 plus is a slightly flexible 2-component construction adhesive based on epoxy resin with a 1:1 mixing ratio. Hand strength after 20 minutes - Cures at room temperature after 48 hours Information about epoxy resin adhesives Epoxy resin-based construction adhesives achieve high tensile shear strengths of at least 10 MPa - even under difficult conditions. Epoxy resin adhesives are liquid reactive polymers that react chemically when mixed and harden into solid plastics. The chemical reaction takes place in the static mixer - both components are optimally mixed. The processing time now starts and the curing process begins.
3M 9628 has very high instant adhesion to a wide range of high and low energy surfaces. The adhesive tape has very good peel strength even at a low thickness. It is also characterised by low odour development, excellent processability and low adhesive leakage.
The 3M Scotch-Weld Flexible Acrylic Adhesive DP8610NS is a black, non-flowing and low-odour 2-part acrylic adhesive. This high elongation, structural strength acrylic adhesive is ideal for bonding dissimilar materials, joining thin panels where an invisible bond is required and any other application requiring flexible bonds. This unique structural adhesive combines the fast cure and minimal surface preparation of an acrylic adhesive with the typical high flexibility and elongation of urethanes or sealants.
The 3M adhesive films 9471 LE and 9472 LE are double-sided, highly transparent, clear adhesive tapes made of modified acrylate adhesive. They are characterised by their high initial tack and very high shear strength. The specially formulated adhesive enables good adhesion to low-energy materials such as PE, PP and powder coatings. Even with low contact pressure, a high initial tack is achieved on most surfaces. As the adhesive film has no fibre reinforcement, the clear, transparent adhesive tape is ideal for inconspicuous bonding of transparent materials.
3M Polyester Film 75 is a double-sided adhesive insulating tape that is characterised by being particularly thin and elastic. While the thermosetting rubber adhesive is particularly resistant to "Flagging" and has a high adhesive strength, the backing has a very high tear resistance. The 0.10 millimetre thin adhesive tape can withstand a breakdown voltage of 6,500 volts and, with a temperature resistance of up to 130 °C, belongs to insulation class B. The transparent polyester film is ideal for interlayer insulation where good adhesion is required on both sides.
Textile entrance flooring for medium footfall of up to 1500 people/day. Due to the composition of coarse and fine fibres, high dirt and moisture absorption can be guaranteed and entry into the building prevented. The material dries out again quickly thanks to optimum moisture distribution. Material height 7.5 mm. Fire behaviour according to EN 13501-1: Efl-s1. Slip resistance according to DIN 51130: R12. All dimensions have edge protection on all sides, with the exception of the 20 m roll (side edge protection only).
TYROLIT single, multi and multi-grain dressers are suitable for dressing all corundum and silicon carbide discs. Multi- and multigrain dressers are often used for flat and external round discs. Large and wide discs require a higher number of carats to reduce diamond wear. Single-grain dressers are graded according to diamond size. Multigrain and multigrain dressers therefore have a higher carat content.
Highly insulating reusable earplugs with a particularly comfortable pistol grip - for even easier insertion! With cord and practical storage box.
€2.62*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.