Starter set: 1x 3M Scotch-Weld 2-component construction adhesive EPX DP270, transparent, 48.5 ml, 1x S-K-S hand tool for EPX 38 to 50 ml cartridges incl. feed piston 2:1

Variants

Farbe

Reset selection

€59.93* % €0.00* (0.00% saved)

Unit price: €59.93* % €0.00*

Unit price (net): €50.36 % €0.00

Contents: 0.0485 liter (€1,235.67* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

Note Delivery cannot be made to private individuals. Delivery may only be made to resellers, professional users or public research, testing or teaching institutions if we have complied with the attached Chemicals Prohibition Ordinance completely filled out and signed by you.

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "Starter set: 1x 3M Scotch-Weld 2-component construction adhesive EPX DP270, transparent, 48.5 ml, 1x S-K-S hand tool for EPX 38 to 50 ml cartridges incl. feed piston 2:1"

3M Scotch-Weld DP270 is a hard 2-component construction adhesive based on epoxy resin for the EPX system. The product with a long processing time is also used as a potting compound for electronics and has good thermal and electrical properties even when exposed to moisture. Furthermore, the potting compound develops only a low exothermic reaction during curing and does not corrode copper. Scotch-Weld DP 270 is UL-listed and was developed for bonding metals as well as for potting and protecting electrical and electronic components.

Properties

Processing time of 60 to 70 minutes
Potting compound for electronics
Good thermal and electrical properties
Hard
High shear strength
Static load
UL listed
Mixing ratio 1:1

Advantages

Long processing time
Low exothermic reaction
No corrosion on copper
UL-listed

Product benefits

No load on the components

Field of application

Bonding of metals and for potting and protecting electrical and electronic components

Questions about the article?

Signal word

Danger

Hazard pictogram(s)

Ausrufezeichen

Gesundheitsgefahr

Umwelt

Hazard statement / CLP

H319 Causes serious eye irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H360F May damage fertility.
H411 Toxic to aquatic life with long lasting effects.

Prevention

P201 Obtain special instructions before use.
P280E Wear protective gloves.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P333+ P313 IF skin irritation or rash occurs: Get medical advice/attention.
P308+ P313 IF exposed or concerned: get medical advice/attention.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 14506

SAP number: 14506

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Downloads

Download data sheet as PDF

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

Customers also bought

3M Scotch-Weld EPX mixing nozzle 48.5 - 50ml DP100 DP105 DP110 DP125 DP190 DP270 DP410 DP420 DP420NS DP460 DP490 DP604NS DP609 DP610 DP620NS DP760 DP804 DP810 DP6310NS DP6330NS TC2810 TC2707 9323

3M Scotch-Weld 2-component construction adhesives are processed with the EPX system: dosing - mixing - application takes place in just one work step. The actual construction adhesive is created within the mixing nozzle for 48.5 ml cartridges through the chemical reaction of both components.

€1.34*

3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8710 NS, black, 45 ml

3M Scotch-Weld Low Odour Acrylic Adhesive DP8710NS is a black, non-flowing, viscoplastic, 2-part, acrylic-based construction adhesive that is low odour and non-flammable. This construction adhesive stands out in the 3M product family of highly versatile low odour acrylic adhesives with improved performance. It offers the usual easy handling of acrylic adhesives that cure quickly and require minimal surface preparation. At the same time, it is characterised by improved impact strength, resistance to cold temperatures, flexibility and a better toxicological profile. It is corrosion resistant on steel and other active metallic materials.

Contents: 0.045 liter (€434.67* / 1 liter)

€19.56*

S-K-S Waiter's knife l Metal bottle opener

Metal waiter's knife with bottle opener, foil cutter and corkscrew with 2 lifting steps. Corks and crown caps can be elegantly removed with the waiter's knives

€4.00*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 100 Plus, transparent, 48.5 ml

Dosing - mixing - application in just one operation - for consistent and defined quality. withstands high dynamic loads 3M Scotch-Weld™ DP 100 plus is suitable for bonding a wide range of materials in many applications. DP 100 plus bonds metals such as aluminium and steel, fibre composites, plastics such as ABS, PC, PMMA and PVC as well as glass, ceramics and wood. Very good flow behaviour DP 100plus is characterised by high shear, peel and impact strength as well as good flexibility. Due to these properties, the product is suitable for applications in the automotive and automotive supply industry, in special vehicle construction, in metalworking and for the manufacture of sporting goods. Possible applications Bonding of glass to metals Bonding of jewellery - for transparency and good optics Bonding of plastics such as ABS, PC, PMMA, PVC etc. bonding of plastics such as ABS, PC, PMMA, PVC etc. Maximum strength under challenging conditions Very suitable for potting - good thermal properties Working time at room temperature 5 minutes - hand strength after 20 minutes 3M Scotch-Weld DP100 plus is a slightly flexible 2-component construction adhesive based on epoxy resin with a 1:1 mixing ratio. Hand strength after 20 minutes - Cures at room temperature after 48 hours Information about epoxy resin adhesives Epoxy resin-based construction adhesives achieve high tensile shear strengths of at least 10 MPa - even under difficult conditions. Epoxy resin adhesives are liquid reactive polymers that react chemically when mixed and harden into solid plastics. The chemical reaction takes place in the static mixer - both components are optimally mixed. The processing time now starts and the curing process begins.

Contents: 0.048 liter (€364.58* / 1 liter)

€17.50*

3M Scotch-Weld EPX mixing nozzle for 45ml cartridges 3M DP8405NS DP8407NS DP8410NS DP8425NS DP8725 DP8805NS DP8810NS DP8825NS DP8010 DP8005

3M Scotch-Weld 2-component construction adhesives are processed with the EPX system: dosing - mixing - application takes place in just one work step. The actual construction adhesive is created within the mixing nozzle for 45ml cartridges through the chemical reaction of both components.

€1.38*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 100, transparent, 50 ml

3M Scotch-Weld DP100 is a hard 2-component construction adhesive based on epoxy resin for the EPX system. The product with a very short processing time achieves high shear strength under static loads and is characterised by transparency, pourability and quick and easy processing. Scotch-Weld DP 100 is UL-listed and has been developed for bonding metals such as steel, aluminium, copper, brass and a variety of plastics such as PC, rigid PVC, GRP, ABS and other materials such as glass and ceramics.

Contents: 0.05 liter (€455.80* / 1 liter)

€22.79*

Recently viewed products

3M 93-AP 631-1 QS2000 connection set, 1 conductor, 12/20 kV, 1x 240 - 400 mmÂ²

The 3M cold shrink connector set is factory tested and designed for the unique cold shrink installation system. The products are supplied pre-stretched on a removable support spiral for efficient and easy installation. The electrical field control and Faraday cage, both integrated into the insulator, simplify installation. Due to the specific properties of the insulating silicone body, a wide range of cable cross-section terminations are possible. 3M cold shrink fittings for medium voltage were developed as a simple and safe solution for connecting medium voltage cables. Cold-shrink connection set suitable for all plastic-insulated 1-conductor cables in accordance with VDE and TGL. Short installation time, no additional tools required.

Variants from €513.84*

€550.09*

Tyrolit Carbide end mill DxT-SxL 13x25-6x70 For stainless steel, shape: 52ZYA - cylinder, Art. 34213609

These carbide end mills have been specially developed for use on stainless steel and manufactured on state-of-the-art CNC grinding machines. The newly developed geometry enables cool grinding with maximum tool life on hand-held, pneumatic and electric machines. The aggressive cutter shape is particularly long-chipping and thus ensures a large stock removal rate. Reduced heat generation protects the milling cutter and the workpiece.

€46.97*

3M Scotch 9545N Impregnated fabric tape, red, 15 mm x 50 m, 0.3 mm

Scotch Fabric Tape 9545N is a high-performance, impregnated fabric tape with a matt PVC surface coating that guarantees long-lasting, clean results. The matt impregnation offers water-repellent protection and still gives the fabric a pleasantly flexible feel. This makes it easy to write on with a ballpoint or felt-tip pen without smudging. The rubber adhesive has excellent adhesion to a wide variety of surfaces. At the same time, the fabric tape can be removed without leaving any adhesive residue. The adhesive tape is easy to unroll and although it is very tear-resistant along its length, it is very easy to tear off crosswise by hand. It is therefore ideal for use as labelling tape, as adhesive tape for bundling cables, for labelling lines, for marking danger zones or for permanent or temporary fastenings. It is resistant to temperatures ranging from -20 °C to 90 °C. The adhesive tape is easy to unroll and although it is very tear-resistant along its length, it is very easy to tear off crosswise by hand. It is available in various signal colours for particularly high visibility.

Contents: 50 meter (€0.40* / 1 meter)

€19.79*

3M Thermally Conductive Adhesive Film 8926-05 12 mm x 40 m, 0.500 mm

3M 8926-05 Thermally Conductive Adhesive Film is a 0.50 mm thick adhesive tape which, with its thin PET carrier material, is characterised by good punchability, processability and easy handling. The thermally conductive products in the 3M 8926 series are based on a soft acrylic polymer, are available in different thicknesses and can be applied excellently to different surfaces. Possible replacement for 3M 8940.

Contents: 40 meter (€1.11* / 1 meter)

Variants from €47.89*

€44.34*

Tyrolit Serrated lock washer DxH 115x22.2 2in1 for steel and stainless steel, P80, shape: 27A - offset version (glass fibre carrier body version), Art. 455312

The STANDARD 2in1 flap disc has two advantages. Firstly, it offers the user a very long service life, and secondly, it guarantees very good specific stock removal. The TYROLIT 2in1 flap disc is used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels.

€2.03*

Tyrolit Flat file BxCxL 10x5x100 Ceramic bonded, shape: 9010, Art. 559

This file is used in particular for processing tools in the wood and machine industry. The different grit sizes allow you to customise your tool to suit your application. Silicon carbide files are mainly used for carbide or carbide-tipped tools and have a grey-green colour. Orange coloured files are mainly used for all types of steel and stainless steel.

€1.93*