3M Versaflo TR-6310E A2P Filter against organic gases and vapours

The pre-filter extends the service life of the TR-600 filter's particle filter by trapping larger particles that would otherwise get into the main filter and clog it. Regular replacement of the pre-filter helps to optimise system performance.

The 3M Versaflo M928 visor protection films are consumables or accessories for the 3M Versaflo M series respiratory protection system.

The 3M Versaflo TR830 fast-charging, intrinsically safe battery is the lithium-ion battery for use with the 3M Versaflo TR-800 blower system and is designed for use in potentially explosive atmospheres. It is equipped with yellow bumpers to protect against shocks. The battery reaches 90 % of its charging capacity in around 3.5 hours and is equipped with an easy-to-read charge level indicator. With the TR-838 battery fixing tool supplied, the battery is mechanically fixed to the blower system so that it cannot come loose unintentionally, preventing the risk of sparks during use in accordance with EN 60079-11. With a new TR-830 intrinsically safe battery and a filter, the TR-800 blower system has an expected operating time of 6 to 10 hours depending on the system configuration used. The operating time of the blower system depends on the age of the battery, the filter saturation, the type of filter or cartridge used and the airflow settings selected by the user. The battery can deliver at least 80% of its original capacity over approximately 750 complete charge/discharge cycles. This corresponds to a doubling of the performance capacity of the non-intrinsically safe standard 3M Versaflo TR-630 and TR-632 batteries.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x Airflow indicator TR-971   - 1x 3M Versaflo safety helmet M206 with comfort face seal and polycarbonate visor, clear

The 3M Versaflo helmet head piece M-307 offers respiratory, eye and face protection as well as head protection in accordance with EN397. It is also characterised by its flame-retardant face cover. The flexible, clear polycarbonate visor with a scratch-resistant coating offers optimum protection against mechanical and chemical hazards. Handling is very easy: thanks to a standardised QRS connection, the air hoses can be rotated freely and can be connected and disconnected with one hand. The ratchet fastener allows the headgear to be adjusted quickly and individually. The M-306 is ideal for use in all industrial areas where head protection is required in addition to respiratory, eye and face protection and where sparks or open flames are also likely, for example in tunnelling or foundries. Suitable accessories such as flame protection covers, head, neck and shoulder covers, visor protection foils and ear muffs are available from 3M.

The 3M Versaflo full-face helmet headpiece M-406 offers respiratory, eye and face protection as well as head protection in accordance with EN397. The head piece also has a chin guard and a protective cape made of hard-wearing material. The cape provides extra protection for the neck, shoulders and chest. The flip-up, clear polycarbonate visor with a scratch-resistant coating provides optimum protection against mechanical and chemical hazards. Handling is very easy: thanks to a standardised QRS connection, the air hoses can be rotated freely and can be connected and disconnected with one hand. The ratchet fastener ensures quick and individual adjustment of the headgear. The M-406 is ideal for use in heavy industry, for example in foundries or the construction industry. Matching accessories such as flame protection covers and visor protection foils are available from 3M. Suitable for the protection and control of oak processionary moths.