3M Versaflo TR-830 battery, battery life up to 7.5 hours, for 3M Versaflo TR-800 respirator blower (incl. TR-838 fastening tools)

A2P filter for use with the 3M Versaflo TR-600 blower unit. The filter is attached directly to the unit. 3M recommends the use of the TR-6300FC filter cover to protect the filter from material damage. The TR-6300FC filter cover is also used as a holder for the TR-6600 pre-filter or the TR-662 spark arrester.

The 3M Versaflo M928 visor protection films are consumables or accessories for the 3M Versaflo M series respiratory protection system.

The 3M Versaflo helmet head piece M-307 offers respiratory, eye and face protection as well as head protection in accordance with EN397. It is also characterised by its flame-retardant face cover. The flexible, clear polycarbonate visor with a scratch-resistant coating offers optimum protection against mechanical and chemical hazards. Handling is very easy: thanks to a standardised QRS connection, the air hoses can be rotated freely and can be connected and disconnected with one hand. The ratchet fastener allows the headgear to be adjusted quickly and individually. The M-306 is ideal for use in all industrial areas where head protection is required in addition to respiratory, eye and face protection and where sparks or open flames are also likely, for example in tunnelling or foundries. Suitable accessories such as flame protection covers, head, neck and shoulder covers, visor protection foils and ear muffs are available from 3M.

The S-757 premium reusable lightweight bonnet is a head piece for the 3M Versaflo respiratory protection system. It covers the head, face, neck and shoulders and offers eye and face protection in accordance with EN166 (protection against liquid splashes and flying particles with low impact energy). The premium reusable lightweight bonnet is characterised by its special material, which absorbs paint mist and thus reduces the risk of the paint beading off the wearer and falling onto the workpiece. The textile material is also coated on the inside to prevent paint from getting onto skin or clothing. The lightweight bonnet has a double neck seal design. The inner part of the neck seal is tucked into the top of the shirt or protective suit. This allows excess air to be channelled over the entire body, providing additional comfort. The lightweight bonnet is an extremely cost-effective solution for environments with high disposal rates: When worn, only the contaminated outer bonnet is replaced, while the headgear and air supply can continue to be used. The rigid design of the headband ensures a uniform air supply. Another plus is that it can be adjusted from the outside so that the wearer can regulate the air distribution to suit their personal comfort requirements. A simple turn of the outer knob is all it takes for the wearer to direct the airflow away from the back of the head and towards the temples, face and visor. The bracket has separate adjustment options for head height and head circumference, allowing comfortable, customised adjustment to a wide range of head shapes. The soft comfort pad can be used to further improve the fit so that the bonnet fits even more wearers perfectly. The S-757 premium reusable lightweight bonnet is available as a starter pack including head support and inner bib. Colour: white. Protection level: TH3.

The pre-filter extends the service life of the TR-600 filter's particle filter by trapping larger particles that would otherwise get into the main filter and clog it. Regular replacement of the pre-filter helps to optimise system performance.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x air flow indicator TR-971   - 1x 3M Versaflo Premium Lightweight Hood S757 starter pack incl. head holder and inner bib, material: Web 22