3M Cubitron II grinding wheel 125 mm, 7.0 mm, 22.23mm #65509IPS

Variants

Durchmesser in mm

Körnung

Reset selection

€14.07* % €0.00* (0.00% saved)

Unit price: €14.07* % €0.00*

Unit price (net): €11.82 % €0.00

No longer available

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Cubitron II grinding wheel 125 mm, 7.0 mm, 22.23mm #65509IPS"

This grinding disc revolutionises your grinding process with faster stock removal and longer service life compared to conventional grinding discs. Rely on the unique technology of the 3M precision grain for metalworking and feel the difference. 3M Cubitron II grinding tools grind faster, are more durable, require less contact pressure and increase productivity.

Properties

Patented 3M precision centre punch with geometrically defined cutting edges
Hard synthetic resin bond

Advantages

Up to three times the stock removal rate of conventional grinding discs
Immediate penetration into the solid material
Fast, cool grinding
Low clogging behaviour of the grinding disc

Product benefits

Up to three times the processing volume & significant time savings
Maximum service life at low pressure
Reduction of unit costs

Questions about the article?

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 17049

Part number: 65509IPS

SAP number: 7100031265

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Recently viewed products

3M ET 1350F-1 Polyester film, black, 1219 mm x 66 m, 0.06 mm

The 3M polyester film 1350F-1 is a particularly thin insulating tape that is also highly resistant. While the acrylate adhesive is particularly resistant to solvents and "flagging", the carrier is characterised by very high tear and abrasion resistance. The 0.06 millimetre thick, flame-retardant adhesive tape can withstand a breakdown voltage of 5,500 volts and belongs to insulating material class B with a temperature resistance of up to 130 °C. The printable polyester film is available in the colours black, white and yellow and is particularly suitable for cover tapes on coils and capacitors.

Contents: 66 meter (€5.29* / 1 meter)

Variants from €7.29*

€348.94*

3M Cubitron II Sanding belt 947A, 120 mm x 9000 mm, 120+

The new Cubitron II 947A sanding belts are characterised by the usual durability and speed of Cubitron II products. They produce a uniform sanding pattern without tarnishing colours. Thanks to the new grit mixture on an X-fabric backing, 947A belts are more flexible than previous Cubitron II belts. They are particularly suitable for hand-held machines at medium to low pressure. With the new 120+ grit, for the first time we are offering you the option of using Cubitron II for finer applications with higher finishing requirements.

Contents: 9 meter (€11.93* / 1 meter)

Variants from €0.73*

€107.41*

Tesa Softprint 52117 Steel Master TP 460mmx25m, soft, white with logo: red

Foam properties - Low thickness tolerances - constant recovery properties of the foam Adhesive properties - lower tack to the plate side - good repositionability of the printing plate - good hold for mounted printing plates - very good removability of the plate - good hold of the adhesive tape on the sleeve surface

Contents: 25 meter (€19.44* / 1 meter)

Variants from €295.85*

€486.03*

3M Silver Cut-Off Wheel cutting-off wheel, 75 mm, 1.0 mm, 6 mm, T41, 51765

Get a fast and even cut for numerous applications with the 3M Silver cutting disc. It cuts quickly through metal tubes, sleeves, flat sheets and other workpieces. The disc contains our precision grain, which has continuously sharp cutting edges, so it cuts through the material rather than scraping or ploughing through it like conventional abrasive grains. This results in a significantly longer service life than conventional abrasives with ceramic grit and a consistently stable high cutting rate over the service life. The disc must be used with an angle grinder or cut-off machine (available separately) and should always be used with a protective cover for safety reasons. The maximum speed of the disc must be greater than or equal to the maximum speed of the angle grinder.

€1.84*

3M Scotch-Brite Precision non-woven disc, PN-DH, fine, 100 mm x no hole

Newly developed for your requirements. Introducing the next step in surface finishing technologies: Scotch-Brite precision non-woven discs. This new addition to the Scotch-Brite range promises the consistency you have come to expect, with faster stock removal and longer abrasive life. By combining two outstanding 3M technologies - fleece and the 3M precision-moulded ceramic grain - you can now achieve an ideal finish even faster. To help you work even more efficiently, these discs are available in brighter, more vibrant colours to make them easier to distinguish. In addition, the range of grits has been extended to include fine and extra coarse versions, giving you an even wider choice of solutions for your abrasive needs. Improve your work processes. These high quality general purpose abrasive discs are designed to optimise the steps involved in surface finishing, including cleaning, blending, deburring and finishing. Typical substrates include aluminium and soft metals, carbon steel and stainless steel. Applications range from the removal of coatings and corrosion to the finishing and post-processing of castings.

Variants from €3.26*

€3.02*

Tyrolit Serrated lock washer DxH 178x22.23 CERABOND serrated lock washer for stainless steel, P60, shape: 28A - straight version (glass fibre carrier body version), Art. 34166182

At TYROLIT, we endeavour to constantly present our customers with innovative products and a comprehensive range. For this reason, TYROLIT has now added the new CERAMIC flap discs to the CERABOND family. A unique bond system combined with a high-performance PREMIUM cloth offers the user more aggressiveness. This flap disc is especially suitable for stainless steels and demanding grinding applications. In addition, the unique bond system prevents premature grit break-out and leads to a long service life of the product. An additional TOP SIZE coating enables cooler grinding, which leads to a longer tool life and reduced discolouration of the workpiece surface. Also in

€9.46*