Product information "3M Scotch-Brite coarse cleaning disc XT-RD Pro, 125 mm x 22 mm, S, extra coarse, M14 thread #51891"
The Scotch-Brite XT Pro contains a silicon carbide abrasive grain integrated into an open nylon fibre. It effectively removes rust, paint, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibres are very adaptable, resistant to abrasion and stress and work well on the edges of a workpiece.
Properties
Suitable for removing scale
Increased work safety and productivity
Maximum service life for all applications
No clogging due to open structure
Low spark formation
Fibre backing for angle grinders - backing pad required
with M14 thread
Advantages
The sharp silicon carbide mineral and the advanced fleece ensure a resistant disc that does not damage the metal
Product benefits
Intended for flat use on angle grinders
Field of application
Paint removal, removal of coatings, adhesive removal, surface preparation
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
14125
Part number:
51891
SAP number:
7100192335
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
When developing the 3M Cubitron II fibre disc 982CX Pro, 3M engineers reformulated the groundbreaking technology behind the 3M Cubitron II abrasives. This revised 3M precision-moulded grain offers even faster stock removal and even longer life to make your work even more productive. The advantage of a complete system 3M Cubitron II fibre disc 982CX Pro is part of a complete sanding system for the angle grinder. When you combine 3M Cubitron II discs with our pneumatic angle grinder and high-performance backing pads, you are ready for a new level of productivity with less vibration, noise and dust. When these components are used together, they reinforce each other's effectiveness and offer optimum abrasive performance - also in terms of abrasive life, stock removal and consistency. Setting standards across industries When developing the 3M Cubitron II fibre disc 982CX Pro, we had your industry in mind. In metalworking, the 982CX Pro does a great job on metals from mild steel to sheet metal. With a wide range of applications in shipbuilding, boatbuilding and metalworking, it masters the challenges specific to your industry. In mechanical engineering, these fibre discs are unbeatable for hard work in agriculture and construction, for industrial machinery, in food processing or for oil and gas plants. Robot technology with maximum efficiency Automated grinding processes are only as efficient as the abrasives used for them. Leading robotic system integrators around the world rely on 3M Cubitron II fibre discs for their legendary performance and ability to reduce downtime. The redesigned shaped ceramic grain of the 3M Cubitron II 982CX Pro fibre disc allows robots to finish welds and maximise efficiency long after other fibre discs have had to be replaced.
For heavy-duty grinding applications such as bevelling/chamfering, slag/roll scale removal, weld seam and edge finishing on a variety of metals, the 3M Silver rough grinding wheel is ideal. These abrasive discs contain our precision-formed abrasive grain, which has continuously sharp cutting edges so that it cuts through the material and does not scrape or plough through the material as with conventional abrasive grains. This results in a significantly longer service life than conventional grinding discs with ceramic grain and a consistently high removal rate over the service life. Use grinding discs together with suitable tools and accessories. Safety note: Only intended for use with tools with an approved protective cover (in accordance with DIN EN 12413 for bonded abrasives).
This grinding disc revolutionises your grinding process with faster stock removal and longer service life compared to conventional grinding discs. Rely on the unique technology of the 3M precision grain for metalworking and feel the difference. 3M Cubitron II grinding tools grind faster, are more durable, require less contact pressure and increase productivity.
Variants from €14.33*
€14.07*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.