3M Microfinishing Film Roll 272L, 100 mm x 50 m, 15 Micron, ASO 3'' Core Keyed Core, Alox 5 Mil #81194

Cup shaft brushes are suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Crimped cup brushes are suitable for cleaning work such as removing paint, rust, scale, encrustations or for deburring.

The 3M MDT-A heat-shrinkable tubing is a halogen-free, medium-walled heat-shrinkable tubing made of radiation cross-linked polyolefin with a hot-melt adhesive coating. The hot-melt adhesive penetrates into all uneven areas and cavities and prevents the ingress of moisture. The 3M MDT-A heat-shrinkable tubing is suitable for insulating plastic and earth cables up to 0.6/1kV, both for installation in the open air and in the ground. The ageing-resistant heat-shrinkable tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink rate of 4.5 to one, you can cover large diameter jumps with just one tube. The 3M MDT-A heat shrink tubing fulfils the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS-compliant.

When machining carbide, the silicon carbide disc is a cost-effective variant for subordinate applications; its importance lies more in the machining of cast iron and non-ferrous metals. For nitrided workpieces with simple profiles or wear-resistant sprayed-on alloys, the silicon carbide disc is a good alternative, as it can be profiled with standard diamond dressing tools.

The 3M Cubitron II Roloc cloth abrasive disc 984F is a quick-change disc on a cloth backing with patented 3M precision ceramic grain for general grinding and stock removal work, especially for stainless steel. This abrasive product combines the cutting performance and service life of the unique precision grain technology with the efficiency of the 3M Roloc quick-change system. The edge-reinforced backing prevents premature deformation of the disc and fraying of the edges during processing. In addition, this product has a grinding aid and thus ensures cool grinding, especially on stainless steel.

3M Hookit Paper Sanding Sheet 255P is a reliable universal abrasive for all large-area lacquer sanding work. This product can be used for coarse, intermediate and fine sanding on all hard and soft woods, lacquer systems, but also for sanding plastic and metal surfaces. Its FreCut coating prevents premature clogging and thus increases the service life.

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.