3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 110, gray, 48.5 ml

Variants

Farbe

Reset selection

€24.04* % €0.00* (0.00% saved)

Unit price: €24.04* % €0.00*

Unit price (net): €20.20 % €0.00

Contents: 0.0485 liter (€495.67* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 110, gray, 48.5 ml"

3M Scotch-Weld DP110 is a viscoplastic 2-component construction adhesive based on epoxy resin for the EPX system. The product achieves high peel strength with a short processing time and is characterised by good ageing properties. Scotch-Weld DP 110 was developed for bonding metals, plastics such as ABS, GRP, PC etc. and other materials.

Properties

Processing time of 8 to 10 minutes
Tough elastic
High shear strength
Good peel strength
Good impact resistance
Good ageing properties
Mixing ratio 1:1
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.

Advantages

Short processing time

Product benefits

Initial loading of the joined parts possible after a short time

Field of application

Bonding of metals, plastics such as ABS, GRP, PC etc. and other materials

Questions about the article?

Signal word

Danger

Hazard pictogram(s)

Ätzwirkung

Ausrufezeichen

Umwelt

Hazard statement / CLP

H318 Causes serious eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.

Prevention

P280B Wear protective gloves/eye protection/face protection.
P273 Avoid release to the environment.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

1 from 1 Reviews

5 from 5 Stars

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

Sorted by

Mittwoch, 2. September 2020

Frank

Einfach zu verarbeiten. Hohe Festigkeit.

Produkt wurde zum Kleben von verzinkten Rohren benutzt. Die Anwendung war einfach und die Verbindung ist stabil.

Article no: 11359

Part number: 110G.48.5

SAP number: 7100200487

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Downloads

Download data sheet as PDF

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M Scotch-Weld EPX mixing nozzle 48.5 - 50ml DP100 DP105 DP110 DP125 DP190 DP270 DP410 DP420 DP420NS DP460 DP490 DP604NS DP609 DP610 DP620NS DP760 DP804 DP810 DP6310NS DP6330NS TC2810 TC2707 9323

3M Scotch-Weld 2-component construction adhesives are processed with the EPX system: dosing - mixing - application takes place in just one work step. The actual construction adhesive is created within the mixing nozzle for 48.5 ml cartridges through the chemical reaction of both components.

€1.34*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 105, transparent, 48.5 ml

3M Scotch-Weld DP105 is a flexible 2-component construction adhesive based on epoxy resin for the EPX system. The product with very short processing time achieves high peel strength and is characterised by transparency, pourability and quick and easy processing. This construction adhesive is particularly effective on materials with different and high expansion coefficients. Scotch-Weld DP 105 has been developed for bonding metals such as steel, aluminium, copper and a wide range of plastics as well as wood, etc.

Contents: 0.05 liter (€480.80* / 1 liter)

€24.04*

3M Scotch-Weld EPX compressed air gun for 50 ml cartridges, 2:1 and 1:1

3M Scotch-Weld 2-component structural adhesives can be processed with the EPX system: simple - fast - clean. The EPX compressed air gun facilitates structural bonding when using the 35 ml / 38 ml / 47 ml / 50 ml cartridges.

€297.48*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 125, gray, 50 ml

Farbe: Grau | ml: 50 ml

3M Scotch-Weld DP125 is a flexible 2-component construction adhesive based on epoxy resin for the EPX system. The product with short processing time achieves high peel strength and is characterised by good ageing properties. Scotch-Weld DP 125 was developed for bonding metals such as steel, aluminium, copper, plastics such as ABS, GRP, PC and glass and ceramics.

Contents: 0.05 liter (€480.80* / 1 liter)

€24.04*

3M Scotch-Weld EPX feed plunger for hand tool 1:2 and 1:1 for 50ml cartridges DP100 DP105 DP110 DP125 DP190 DP270 DP410 DP460 DP460EG DP490 DP760 DP609 DP610 DP620NS TC-2810 TC-2707 9323

3M Scotch-Weld 2-component construction adhesives can be processed with the EPX system: dosing - mixing - application takes place in just one work step. Use this feed plunger for all adhesives with a 1:1 / 2:1 mixing ratio.

€10.98*

EPX hand-held device 35 to 50 ml cartridges incl. feed piston 1:1/2:1 and 10:1

The hand-held processing device for EPX was developed for processing 38 ml to 50 ml cartridges. With the EPX system, the adhesive is dispensed, mixed and applied to the materials to be bonded. The choice of mixing nozzle and feed piston depends on the adhesive. The manual application device enables mobile and independent bonding and also includes the 1:1 / 2:1 / 10:1 feed piston.

€83.63*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 190, gray, 50 ml

Farbe: Grau | ml: 50 ml

3M Scotch-Weld DP190 is a flexible 2-component construction adhesive based on epoxy resin for the EPX system. The product with a long working time achieves high peel strength and is characterised by good levelling properties as well as its simple and fast processing. Scotch-Weld DP 190 is UL-specified and has been developed for bonding metals such as steel, aluminium, copper, plastics such as ABS, GRP, PC, rubber and other materials.

Contents: 0.05 liter (€480.80* / 1 liter)

€24.04*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 100 Plus, transparent, 48.5 ml

Farbe: Transparent | Litres: 0,0455 | Typ: Cartridge

Dosing - mixing - application in just one operation - for consistent and defined quality. withstands high dynamic loads 3M Scotch-Weld™ DP 100 plus is suitable for bonding a wide range of materials in many applications. DP 100 plus bonds metals such as aluminium and steel, fibre composites, plastics such as ABS, PC, PMMA and PVC as well as glass, ceramics and wood. Very good flow behaviour DP 100plus is characterised by high shear, peel and impact strength as well as good flexibility. Due to these properties, the product is suitable for applications in the automotive and automotive supply industry, in special vehicle construction, in metalworking and for the manufacture of sporting goods. Possible applications Bonding of glass to metals Bonding of jewellery - for transparency and good optics Bonding of plastics such as ABS, PC, PMMA, PVC etc. bonding of plastics such as ABS, PC, PMMA, PVC etc. Maximum strength under challenging conditions Very suitable for potting - good thermal properties Working time at room temperature 5 minutes - hand strength after 20 minutes 3M Scotch-Weld DP100 plus is a slightly flexible 2-component construction adhesive based on epoxy resin with a 1:1 mixing ratio. Hand strength after 20 minutes - Cures at room temperature after 48 hours Information about epoxy resin adhesives Epoxy resin-based construction adhesives achieve high tensile shear strengths of at least 10 MPa - even under difficult conditions. Epoxy resin adhesives are liquid reactive polymers that react chemically when mixed and harden into solid plastics. The chemical reaction takes place in the static mixer - both components are optimally mixed. The processing time now starts and the curing process begins.

Contents: 0.048 liter (€364.58* / 1 liter)

€17.50*

Recently viewed products

Tesa 51235 4mmx20000m red

tesa 51235 is a self-adhesive, highly tear-resistant tear strip based on a PP carrier that is equipped with a synthetic rubber adhesive. The special co-extruded PE/PP carrier is characterised by its excellent tear performance and comparatively low thickness. The elastic element in the carrier film also makes it possible to tear the packaging at an angle.

Contents: 20000 meter (€0.01* / 1 meter)

€287.59*

3M Cubitron II Sanding belt 984F, 30 mm x 533 mm, 60+

The precision-moulded abrasive grain cuts evenly through the metal, has a permanently sharp effect and achieves a clean, low-burr and even surface. The uniform structure of the 3M 984F impresses with the fastest sanding (up to 40% faster sanding processes) and maximum stock removal, especially when chamfering and stock removal sanding. The Cubitron II abrasive belt achieves 2 to 4 times the service life of other products. The even processing of the workpiece in combination with the integrated sanding aid ensures cool sanding and prevents stress cracks and discolouration.

Contents: 0.533 meter (€8.71* / 1 meter)

Variants from €4.43*

€4.64*

Tesakrepp 4309 15mmx50m light brown

tesakrepp 4309 is a weakly creped, particularly stretchy and flexible paper masking tape with a very good initial tack.

Contents: 50 meter (€0.04* / 1 meter)

€2.03*

POLY-PTX Non-woven wheel, 115 mm x 50 mm, grain 60

Very high quality non-woven fabric for a particularly long service life. Produces a shadow-free industrial finish (matting, satinising). Also suitable for pre-polishing, removing oxide layers and levelling "pre-polished" Sheets and smoothing surfaces. With grit 60, 80 and 180 with a diameter of 115 mm, you get a working width of 110 mm (fits all satin finishing machines). This means that the clamping screw is recessed in the wheel and you can sand right into the edge area. With vibration-damped sleeve for 1-fold, 2-fold and 4-fold splined shafts, ensuring 100 % concentricity.

Variants from €13.05*

€16.96*

3M Transfer adhesive tape 9472, transparent, 610 mm x 55 m, 0.13 mm

The transfer adhesive tapes in the 3M 300 adhesive series are characterised by their very high initial adhesion and are particularly suitable for finishing metal and plastic signs. The transfer adhesive tapes are temperature-resistant from -40°C to +85°C (up to +120°C for short periods).

Contents: 55 meter (€19.92* / 1 meter)

Variants from €6.52*

€1,095.53*

3M Versaflo Disposable lightweight bonnet S133S, with integrated head holder, white, universal textile material, size S/M - Material: Web 24

The disposable lightweight bonnet S-133S is a head piece of the S series for the 3M Versaflo respiratory protection system. It covers the head and face and provides eye and face protection in accordance with EN166 (protection against liquid splashes and flying particles with low impact energy). The disposable lightweight bonnet is made from the cost-effective universal textile material Web24. This makes it an ideal solution for applications in which the entire head section needs to be replaced frequently - for example in pharmaceutical production. As with all lightweight bonnets in the S series, the excellent air distribution of this model ensures greater comfort and less noise. The extra-large field of vision offers excellent visibility. The S-133S disposable lightweight bonnet is available in two adjustable sizes. This product is size S and white in colour. Protection level: TH3.

€43.72*